Support
Topic | Replies | Views | Activity | |
---|---|---|---|---|
How to use Kria-PYNQ from the command line?
Hi, I recently installed Kria-PYNQ on my KV260, and it works fine from JupyterLab. But, I sometimes want to use PYNQ applications from the command line. When I was using PYNQ v2.6 on ZCU104, there were no problems in us… |
5 | 1494 | September 22, 2022 | |
Read Me: How to ask a question on the forum, and FAQs
How to post a question on the PYNQ forums This post is intended to cover information you should include when posting a question on the forums, to help you get a better/faster response to your issue. Please include as m… |
0 | 1476 | March 25, 2020 | |
Read this before posting
When posting support requests, please include the following information: PYNQ version you are using Your board Full details of the error message you see, or a detailed description of the problem you experience. Steps t… |
4 | 1325 | March 1, 2024 | |
About the Support category
|
0 | 886 | April 3, 2019 | |
Jupyter Kernel dying upon write to custom IP. Is this an address problem?
|
3 | 24 | April 19, 2024 | |
How can send a command from PS to PL?
|
1 | 46 | April 17, 2024 | |
Always stuck at dma.sendchannel.wait()
|
0 | 13 | April 17, 2024 | |
Eclypse Z7: Could not find UIO device for interrupt pin
|
1 | 19 | April 16, 2024 | |
How to make the PYNQ with Ubuntu2022.2 version
|
6 | 241 | April 16, 2024 | |
Questions About PYNQ Framework
|
6 | 109 | April 16, 2024 | |
ZCU111 can not use my overlay
|
0 | 20 | April 16, 2024 | |
Cannot read/write to AXI-Lite registers [MATLAB IP]
|
0 | 27 | April 15, 2024 | |
Petalinux using a version >=2.6 in 2021/2022 tools
|
3 | 479 | April 14, 2024 | |
Tar: cannot hard link to 'crosstool-ng-1.24.0.tar.bz2'
|
7 | 481 | April 14, 2024 | |
RFSoC 4x2 Xlinx QPSK tranceiver example
|
3 | 38 | April 12, 2024 | |
RFSoC 4x2 Reference Manual
|
3 | 107 | April 12, 2024 | |
Petalinux2021.2 PYNQ-Z2
|
1 | 31 | April 12, 2024 | |
HDMI Processing Using PYNQ
|
0 | 47 | April 11, 2024 | |
Re-building base overlay PYNQ 2.5.4
|
0 | 35 | April 11, 2024 | |
PYNQ Linux sudo permissions
|
3 | 56 | April 11, 2024 | |
Question about pin assignment and compile error
|
1 | 37 | April 11, 2024 | |
Accesing RAM from PL only
|
6 | 166 | April 9, 2024 | |
Looking for board dimensions for RFSoC 4x2
|
0 | 39 | April 5, 2024 | |
PCAM 5c with Kria KV260
|
1 | 111 | April 5, 2024 | |
Does PYNQ support ZU67DR?
|
8 | 122 | March 19, 2024 | |
Output getting filled with zero
|
10 | 123 | April 3, 2024 | |
Work around for Xlnk being used in QNN-MO-PYNQ example
|
2 | 60 | April 3, 2024 | |
Using the DebugBridge to visualize an ILA in Vivado
|
4 | 338 | March 31, 2024 | |
YOLOV5 model on pynq
|
0 | 97 | March 27, 2024 | |
AttributeError: Could not find IP or hierarchy fir_filter in overlay
|
15 | 2669 | March 27, 2024 |