# Adding Reconfigurable Modules to Partitions in the Composable Pipeline Design

**URL:** <https://discuss.pynq.io/t/adding-reconfigurable-modules-to-partitions-in-the-composable-pipeline-design/5455>\
**Category:** Support\
**Created:** [April 6, 2023, 4:01pm UTC](https://discuss.pynq.io/t/adding-reconfigurable-modules-to-partitions-in-the-composable-pipeline-design/5455 "2023-04-06T16:01:21Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![briansune](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/briansune/32/3087_2.png) [@briansune](https://discuss.pynq.io/u/briansune)\
**Post date:** [April 14, 2023, 10:56am UTC](https://discuss.pynq.io/t/adding-reconfigurable-modules-to-partitions-in-the-composable-pipeline-design/5455/4 "2023-04-14T10:56:51Z")

</div>

@cking

Maybe you need more understand how to create the PR block and the flow of PR block:

> [@PYNQ 2.7 DFX Partial Reconfiguration under Vivado 2020.2](https://discuss.pynq.io/t/pynq-2-7-dfx-partial-reconfiguration-under-vivado-2020-2/4713):
>
> Hello all, Introduction Due to limited support on the modulator(s) about example of DFX and procedure. I will try to share the DFX on PYNQ 2.7 flow and method that I think it is working. The goal is to provide a simplest and easiest start of DFX on PR. No “composite overlay”, no other installation just PYNQ default API. First we are targeting Vivado 2020.2 not 2020.2.# which is the same build revision of the PYNQ on SD Image. So the first element is to make sure it is aligning both SD imag…

It is very similar to new version of Vivado only the PR block uses BDC in newer version.

ENJOY~

---

_[View the full topic](https://discuss.pynq.io/t/adding-reconfigurable-modules-to-partitions-in-the-composable-pipeline-design/5455)._