# AXI GPIO in PYNQ Z2 for a pin package voltage control **URL:** \ **Category:** Support\ **Created:** [March 5, 2024, 8:48am UTC](https://discuss.pynq.io/t/axi-gpio-in-pynq-z2-for-a-pin-package-voltage-control/6716 "2024-03-05T08:48:19Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![cathalmccabe](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/cathalmccabe/32/3348_2.png) [@cathalmccabe](https://discuss.pynq.io/u/cathalmccabe)\ **Post date:** [March 5, 2024, 4:20pm UTC](https://discuss.pynq.io/t/axi-gpio-in-pynq-z2-for-a-pin-package-voltage-control/6716/2 "2024-03-05T16:20:09Z")
There are a few tutorials which may be helpful here: > **[GitHub - cathalmccabe/PYNQ\_tutorials](https://github.com/cathalmccabe/PYNQ_tutorials)** > > Contribute to cathalmccabe/PYNQ\_tutorials development by creating an account on GitHub. This video: [![](https://us1.discourse-cdn.com/flex019/uploads/pynq1/original/2X/a/afd4c40e32c5aae8df53655cce33739a0b2c54be.jpeg "PYNQ AXI GPIO example") ](https://www.youtube.com/watch?v=TpCax4yjxUM) Example: > [@Tutorial: Using a new hardware design with PYNQ (AXI GPIO)](https://discuss.pynq.io/t/tutorial-using-a-new-hardware-design-with-pynq-axi-gpio/146): > > Using a new hardware design with PYNQ The tutorial will show you how to use the Vivado hardware design created in the previous tutorial with PYNQ. This tutorial follows on from a previous tutorial which showed [how to create a new hardware design for PYNQ](https://discuss.pynq.io/t/tutorial-creating-a-hardware-design-for-pynq/145). This tutorial is based on the v2.4 PYNQ image and Vivado 2018.2. A Pynq-Z2 board was used to run the code in this tutorial. If you would like to try this tutorial on your board, you can download the notebook version of this page: [Jupyter note…](https://discuss.pynq.io/uploads/short-url/g8O85AMwDcYgspPkqDpG1cH4xWm.ipynb) Cathal --- _[View the full topic](https://discuss.pynq.io/t/axi-gpio-in-pynq-z2-for-a-pin-package-voltage-control/6716)._