# AXI Quad SPI V3.2 IP's SPI\_clock signal not found!

**URL:** <https://discuss.pynq.io/t/axi-quad-spi-v3-2-ips-spi-clock-signal-not-found/8555>\
**Category:** Support\
**Created:** [June 18, 2025, 7:29am UTC](https://discuss.pynq.io/t/axi-quad-spi-v3-2-ips-spi-clock-signal-not-found/8555 "2025-06-18T07:29:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bobs0919708327](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/bobs0919708327/32/7102_2.png) [@bobs0919708327](https://discuss.pynq.io/u/bobs0919708327)\
**Post date:** [June 18, 2025, 7:29am UTC](https://discuss.pynq.io/t/axi-quad-spi-v3-2-ips-spi-clock-signal-not-found/8555/1 "2025-06-18T07:29:25Z")

</div>

![image](https://us1.discourse-cdn.com/flex019/uploads/pynq1/original/2X/a/ae11c66d37f16347c31d30f78dd1e1adb710c619.png)  
Hello everyone

I encountered that the SPI IP does not provide a clock output pin. How can I adjust it normally?

---

<div class="post-metadata">

**Author:** ![marioruiz](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/marioruiz/32/2177_2.png) [@marioruiz](https://discuss.pynq.io/u/marioruiz)\
**Post date:** [June 18, 2025, 9:54am UTC](https://discuss.pynq.io/t/axi-quad-spi-v3-2-ips-spi-clock-signal-not-found/8555/2 "2025-06-18T09:54:03Z")

</div>

Hi @bobs0919708327,

Welcome to the PYNQ community.

This question is outside the scope of the PYNQ forum. You may be better off asking in the Xilinx forums.

Mario