# Building PYNQ for Z-Turn board

**URL:** <https://discuss.pynq.io/t/building-pynq-for-z-turn-board/8896>\
**Category:** Support\
**Created:** [December 4, 2025, 10:11am UTC](https://discuss.pynq.io/t/building-pynq-for-z-turn-board/8896 "2025-12-04T10:11:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![YosefRezazadeh](https://avatars.discourse-cdn.com/v4/letter/y/e68b1a/32.png) [@YosefRezazadeh](https://discuss.pynq.io/u/YosefRezazadeh)\
**Post date:** [December 4, 2025, 10:11am UTC](https://discuss.pynq.io/t/building-pynq-for-z-turn-board/8896/1 "2025-12-04T10:11:14Z")

</div>

Hi  
The Z-Turn board is not officially supported by PYNQ,so is it possible to build PYNQ image for the Z-Turn board from scratch? If it is possible, How should I do that?

---

<div class="post-metadata">

**Author:** ![joshgoldsmith](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/joshgoldsmith/32/5347_2.png) [@joshgoldsmith](https://discuss.pynq.io/u/joshgoldsmith)\
**Post date:** [December 11, 2025, 3:14am UTC](https://discuss.pynq.io/t/building-pynq-for-z-turn-board/8896/2 "2025-12-11T03:14:46Z")

</div>

Hi @YosefRezazadeh

Welcome to the PYNQ community.

It is entirely possible to build a PYNQ image for a custom board, and in fact this is quite common.

I’d recommend looking through the [PYNQ documentation](https://pynq.readthedocs.io/en/latest/pynq_sd_card.html), the SD Build Flow readme in the [PYNQ GitHub repo](https://github.com/Xilinx/PYNQ/blob/master/sdbuild/README.md).

There are also quite a few similar posts on this forum where users wanted to port PYNQ to various custom boards. Have a look through the older posts for more useful information.