# Building PYNQ-Z2 image fails with mkfs.ext4: Ext2 inode **URL:** \ **Category:** Support\ **Created:** [October 23, 2023, 1:58pm UTC](https://discuss.pynq.io/t/building-pynq-z2-image-fails-with-mkfs-ext4-ext2-inode/6218 "2023-10-23T13:58:37Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![gabrielgagne](https://avatars.discourse-cdn.com/v4/letter/g/e9bcb4/32.png) [@gabrielgagne](https://discuss.pynq.io/u/gabrielgagne)\ **Post date:** [October 23, 2023, 1:58pm UTC](https://discuss.pynq.io/t/building-pynq-z2-image-fails-with-mkfs-ext4-ext2-inode/6218/1 "2023-10-23T13:58:37Z")
Hello, First of all, here is my setup after following the _Getting started_ documentation: - systemd-nspawn Ubuntu 20.04. I originally tried with Vagrant, but there were a lot of weird permission bugs or something, so I gave up on it. - Installed Vivado 2022.1, Vitis 2022.1, PetaLinux 2022.1 - Cloned PYNQ repository into my workspace folder - Ran `/sdbuild/scripts/setup_host.sh` without error - Sourced `/settings.sh` and `/2022.1/settings64.sh` - Vivado and Vitis launch without error (I had to install a few things like ncurses6 and en\_US locale iirc) Unrelated to my current issue, but I believe there is a mistake in the board-agnostic images for `arm` architecture. The downloaded file’s name ends only with `.gz` instead of `.tar.gz`. I got somewhat confused by this, but a simple rename seemed to remove the `make` issues. Now about my main issue. I am currently trying to use sdbuild to build Pynq 3.0.1 for my Zybo Z7-20 board. I figured I would try to build for an officially supported board first to see if everything was okay, so I ran `$ make BOARDS=Pynq-Z2` in `/sdbuild`. After a while I get the following error message: ![image](https://us1.discourse-cdn.com/flex019/uploads/pynq1/original/2X/e/e661e594c0fdcd015405020a36dafef91c18e313.png) I have tried searching for fixes online, but found no mention of this issue. Thanks for any help or tips