# I got an error when using the PYNQ-ZU development board for yolov5 reasoning, how do I fix it

**URL:** <https://discuss.pynq.io/t/i-got-an-error-when-using-the-pynq-zu-development-board-for-yolov5-reasoning-how-do-i-fix-it/7209>\
**Category:** Support\
**Created:** [June 27, 2024, 1:41am UTC](https://discuss.pynq.io/t/i-got-an-error-when-using-the-pynq-zu-development-board-for-yolov5-reasoning-how-do-i-fix-it/7209 "2024-06-27T01:41:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GANGQINJIA](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/gangqinjia/32/5773_2.png) [@GANGQINJIA](https://discuss.pynq.io/u/GANGQINJIA)\
**Post date:** [June 27, 2024, 1:41am UTC](https://discuss.pynq.io/t/i-got-an-error-when-using-the-pynq-zu-development-board-for-yolov5-reasoning-how-do-i-fix-it/7209/1 "2024-06-27T01:41:16Z")

</div>

- Starting 4 threads…

WARNING: Logging before InitGoogleLogging() is written to STDERR

W0620 13:14:26.351315 2432 xrt\_cu.cpp:188] cu timeout! device\_core\_idx 0 handle=0xaaaacdada910 ENV\_PARAM(XLNX\_DPU\_TIMEOUT) 10000 state 1 ERT\_CMD\_STATE\_COMPLETED 4 ms 10010 bo=1 is\_done 0

I0620 13:14:26.351429 2432 xrt\_cu.cpp:99] Total: 10010379us ToDriver: 18446743150476739us ToCU: 0us Complete: 0us Done: 933243191us

F0620 13:14:26.351469 2432 dpu\_control\_xrt\_edge.cpp:186] dpu timeout! core\_idx = 0

LSTART 0 LEND 0 CSTART 0 CEND 0 SSTART 1023 SEND 0 MSTART 1023 MEND 0 CYCLE\_L 0 CYCLE\_H 0

\*\*\* Check failure stack trace: \*\*\*

Aborted (core dumped)

---

<div class="post-metadata">

**Author:** ![GANGQINJIA](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/gangqinjia/32/5773_2.png) [@GANGQINJIA](https://discuss.pynq.io/u/GANGQINJIA)\
**Post date:** [June 27, 2024, 3:17am UTC](https://discuss.pynq.io/t/i-got-an-error-when-using-the-pynq-zu-development-board-for-yolov5-reasoning-how-do-i-fix-it/7209/2 "2024-06-27T03:17:50Z")

</div>

(vitis-ai-pytorch) Vitis-AI /workspace/1/yolov5 \> vai\_c\_xir -x ./quantize\_result/DetectMultiBackend\_int.xmodel -a arch\_zuboard.json -o ./ -n model

Use this command to generate an Xmodel file and get an error.

Starting 1 threads…  
WARNING: Logging before InitGoogleLogging() is written to STDERR  
W0627 03:03:32.429781 1829 xrt\_cu.cpp:188] cu timeout! device\_core\_idx 0 handle=0xaaaad05501b0 ENV\_PARAM(XLNX\_DPU\_TIMEOUT) 10000 state 1 ERT\_CMD\_STATE\_COMPLETED 4 ms 10010 bo=1 is\_done 0  
I0627 03:03:32.429903 1829 xrt\_cu.cpp:99] Total: 10019743us ToDriver: 18446743623408429us ToCU: 0us Complete: 0usDone: 460320865us  
F0627 03:03:32.429947 1829 dpu\_control\_xrt\_edge.cpp:186] dpu timeout! core\_idx = 0  
LSTART 0 LEND 0 CSTART 0 CEND 0 SSTART 1023 SEND 0 MSTART 1023 MEND 0 CYCLE\_L 0 CYCLE\_H 0  
\*\*\* Check failure stack

应该如何解决呢
