# Info about Pynq Z2 + PulsarPMODs

**URL:** <https://discuss.pynq.io/t/info-about-pynq-z2-pulsarpmods/2115>\
**Category:** Support\
**Created:** [December 9, 2020, 8:57am UTC](https://discuss.pynq.io/t/info-about-pynq-z2-pulsarpmods/2115 "2020-12-09T08:57:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![scardig](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@scardig](https://discuss.pynq.io/u/scardig)\
**Post date:** [December 9, 2020, 8:57am UTC](https://discuss.pynq.io/t/info-about-pynq-z2-pulsarpmods/2115/1 "2020-12-09T08:57:40Z")

</div>

Hello,

we are about to acquire a Pynq Z2 board and we would like to test it in conjunction with PulsarPMODs from Analog (ADC boards with a PMOD connector and a SPI-compatible interface. See here [PulsarPMODs Evaluation Board | Analog Devices](https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/PulsarPMODs.html) ). Our purpose would be to connect them to the Z2 and see if we can read data (as per [PulSAR ADC PMODs [Analog Devices Wiki]](https://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/pulsar-adc-pmods#digital_interface_pmod) ) and then save to microsd. Two questions:

1. Can you point us to the right entry point to create our own driver to access data ?

2. Can we expect to sample (and save) at full speed i.e. 18-Bits 600 KSPS ?

3. Any alternative solution for our purpose ?

Thanx