# Initalising MIPI IP Block with PYNQ

**URL:** <https://discuss.pynq.io/t/initalising-mipi-ip-block-with-pynq/4059>\
**Category:** Support\
**Created:** [April 18, 2022, 6:34pm UTC](https://discuss.pynq.io/t/initalising-mipi-ip-block-with-pynq/4059 "2022-04-18T18:34:57Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![marioruiz](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/marioruiz/32/2177_2.png) [@marioruiz](https://discuss.pynq.io/u/marioruiz)\
**Post date:** [April 19, 2022, 7:51am UTC](https://discuss.pynq.io/t/initalising-mipi-ip-block-with-pynq/4059/2 "2022-04-19T07:51:09Z")

</div>

Hi @JackBonnellDev,

There’s no enough information in the post. Did you resolve this [IIC 16 bit address pynq.lib.iic - #4 by JackBonnellDev](https://discuss.pynq.io/t/iic-16-bit-address-pynq-lib-iic/4027/4)?

What board are you using? What have you tried? Do you see any activity on the ILA?  
Did you configure the MIPI-CSI 2 Rx Subsystem with the characteristics of the sensor you are using?

Mario

---

_[View the full topic](https://discuss.pynq.io/t/initalising-mipi-ip-block-with-pynq/4059)._