# Initial setup: test fail **URL:** \ **Category:** Support\ **Created:** [February 20, 2023, 5:03pm UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248 "2023-02-20T17:03:12Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Nikita](https://avatars.discourse-cdn.com/v4/letter/n/a8b319/32.png) [@Nikita](https://discuss.pynq.io/u/Nikita)\ **Post date:** [February 20, 2023, 5:03pm UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/1 "2023-02-20T17:03:13Z")
- RFSOC 4x2 Pynq Upon following the quick start guide, the setup continues normally until step 4.2 where the LCD should display an IP address. Rather than an IP address I receive a notification from the LCD saying, “Test Fail”. I checked the micro-SD provided and have attached the files located on the card. ---
**Author:** ![Nikita](https://avatars.discourse-cdn.com/v4/letter/n/a8b319/32.png) [@Nikita](https://discuss.pynq.io/u/Nikita)\ **Post date:** [February 20, 2023, 5:04pm UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/2 "2023-02-20T17:04:49Z")
(post deleted by author) ---
**Author:** ![Nikita](https://avatars.discourse-cdn.com/v4/letter/n/a8b319/32.png) [@Nikita](https://discuss.pynq.io/u/Nikita)\ **Post date:** [February 20, 2023, 5:07pm UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/3 "2023-02-20T17:07:06Z")
Here is what I see in the sd card ![image](https://us1.discourse-cdn.com/flex019/uploads/pynq1/original/2X/2/2877762a5c122786a6bb40faa2d1afb4b6bebef6.png) ---
**Author:** ![briansune](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/briansune/32/3087_2.png) [@briansune](https://discuss.pynq.io/u/briansune)\ **Post date:** [February 20, 2023, 5:40pm UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/4 "2023-02-20T17:40:30Z")
@Nikita Follow user manual, Image at the below (Resources): [https://www.realdigital.org/hardware/rfsoc-4x2](https://www.realdigital.org/hardware/rfsoc-4x2) Use the default image and the 4 steps and see if this is still problematic. ENJOY~ ---
**Author:** ![Nikita](https://avatars.discourse-cdn.com/v4/letter/n/a8b319/32.png) [@Nikita](https://discuss.pynq.io/u/Nikita)\ **Post date:** [February 20, 2023, 5:52pm UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/5 "2023-02-20T17:52:42Z")
Followed those 4 steps and I got the test fail message. That is why I checked the micro sd to see what was on it. ---
**Author:** ![skalade](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/skalade/32/686_2.png) [@skalade](https://discuss.pynq.io/u/skalade)\ **Post date:** [February 20, 2023, 6:04pm UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/6 "2023-02-20T18:04:24Z")
Hi @Nikita, Try downloading and burning a new sd card image for the RFSoC4x2 from [PYNQ - Python productivity for Zynq - Board](http://www.pynq.io/board.html). Thanks Shawn ---
**Author:** ![Nikita](https://avatars.discourse-cdn.com/v4/letter/n/a8b319/32.png) [@Nikita](https://discuss.pynq.io/u/Nikita)\ **Post date:** [February 21, 2023, 7:22pm UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/7 "2023-02-21T19:22:02Z")
When I plug the SD card into my computer two drives pop up. Which one would you recommend I try burning a new image to? ![image](https://us1.discourse-cdn.com/flex019/uploads/pynq1/original/2X/9/9345e61bb21d0c48d90a8b7648dbd7ea97df3bed.png) ---
**Author:** ![briansune](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/briansune/32/3087_2.png) [@briansune](https://discuss.pynq.io/u/briansune)\ **Post date:** [February 22, 2023, 8:06am UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/8 "2023-02-22T08:06:08Z")
@Nikita Simply if you use Windows, right click on the ‘start logo’ left bottom and disk manager. remove all partition of the SD card. > **[Win32 Disk Imager](https://sourceforge.net/projects/win32diskimager/)** > > Download Win32 Disk Imager for free. A Windows tool for writing images to USB sticks or SD/CF cards . This program is designed to write a raw disk image to a removable device or backup a removable device to a raw image file. It is very useful for... Use ‘Win32DiskImager’ to burn the image to the SD location. ENJOY~ ---
**Author:** ![marioruiz](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/marioruiz/32/2177_2.png) [@marioruiz](https://discuss.pynq.io/u/marioruiz)\ **Post date:** [February 22, 2023, 8:48am UTC](https://discuss.pynq.io/t/initial-setup-test-fail/5248/9 "2023-02-22T08:48:04Z")
Hi @Nikita, The process to flash the SD card image is described here > **[Getting started with your RFSoC 4x2](https://www.rfsoc-pynq.io/rfsoc_4x2_getting_started.html)** > > RFSOC-PYNQ is an extension to PYNQ which support the AMD-Xilinx Zynq RFSoC family of devices. Mario