# Issues with the PYNQ make **URL:** \ **Category:** Support\ **Created:** [May 29, 2019, 11:37pm UTC](https://discuss.pynq.io/t/issues-with-the-pynq-make/141 "2019-05-29T23:37:03Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Walter\_Maguire](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/walter_maguire/32/96_2.png) [@Walter\_Maguire](https://discuss.pynq.io/u/Walter_Maguire)\ **Post date:** [May 31, 2019, 1:28am UTC](https://discuss.pynq.io/t/issues-with-the-pynq-make/141/3 "2019-05-31T01:28:35Z")
Hi Rock, The details of the spec file and steps taken are detailed in this post > [@Porting of petalinux meta-user recipes](https://discuss.pynq.io/t/porting-of-petalinux-meta-user-recipes/140): > > Hi all, Which forum should I use to post questions, this one [https://discuss.pynq.io/](https://discuss.pynq.io/) or the older [Redirecting to Google Groups](https://groups.google.com/forum/#!forum/pynq_project)? My particular issue is concerned with porting petalinux\_bsp meta-user layer configurations to PYNQ builds. The method is described in the Readme.md file located in the PYNQ sdbuild directory. The document states “Meta-user configurations can be added to the myboards/Myboard/petalinux\_bsp folder so the patches will be applied to the new BSP.” I have tried this fo… The contents of the spec file are The content of the PYNQ-pnfs.spec file is ARCH\_PYNQ-pnfs := arm BSP\_PYNQ-pnfs := pnfs.bsp BITSTREAM\_PYNQ-pnfs := cz2\_wrapper.bit STAGE4\_PACKAGES\_PYNQ-pnfs := pynq boot\_leds peekpoke sampleapp ethernet pnfs.bsp is the bsp generated from executing in the associated SDK hardware directory petalinux-package --bsp -p ~/peta-z2/pnfs/ --hwsource . --output pnfs.bsp Note, this issue exists using the standard board files which come with the PYNQ distribution. I will have a look at the scripts and makefiles when I have a chance to see if I can determine where the issue lies. Regards Walter --- _[View the full topic](https://discuss.pynq.io/t/issues-with-the-pynq-make/141)._