# KV260 read mipi frame stuck on dma, help

**URL:** <https://discuss.pynq.io/t/kv260-read-mipi-frame-stuck-on-dma-help/5347>\
**Category:** Support\
**Created:** [March 14, 2023, 11:11am UTC](https://discuss.pynq.io/t/kv260-read-mipi-frame-stuck-on-dma-help/5347 "2023-03-14T11:11:47Z")\
**Posts on this page:** 1\
**Showing post:** 24

<div class="post-metadata">

**Author:** ![cking](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/cking/32/5476_2.png) [@cking](https://discuss.pynq.io/u/cking)\
**Post date:** [February 12, 2024, 4:23pm UTC](https://discuss.pynq.io/t/kv260-read-mipi-frame-stuck-on-dma-help/5347/24 "2024-02-12T16:23:04Z")

</div>

Hi Sergicuen,

Apologies for being inactive over the last while.

Certainly, the following configuration is what I take as the working case:

Top level notebook:  
[1080p working.ipynb](https://discuss.pynq.io/uploads/short-url/a22lGH0jMu9u9BqWWly76Zw2tp0.ipynb) (14.1 KB)

That reaches out to run the following nb (hence keep in local directory alongside top level:  
[pcam\_cfg.ipynb](https://discuss.pynq.io/uploads/short-url/wcuewutdEm0sH6JmmEwO7KRMtzO.ipynb) (26.2 KB)

And the working bitstream and hwh that make up my hardware design (modified Adam Taylor design).

[taylor\_v3.bit](https://discuss.pynq.io/uploads/short-url/xnu6SMJpc4qrvSchbbLDvDfIlPb.bit) (7.4 MB)  
[taylor\_v3.hwh](https://discuss.pynq.io/uploads/short-url/cZIpFz8SWwKxJjm6FoTLyfvwvov.hwh) (1.4 MB)

Hope this is still useful to you!  
Regards,  
Cameron

---

_[View the full topic](https://discuss.pynq.io/t/kv260-read-mipi-frame-stuck-on-dma-help/5347)._