# Microblaze on pynq z2 **URL:** https://discuss.pynq.io/t/microblaze-on-pynq-z2/6443 **Category:** Support **Created:** [December 15, 2023, 9:04am UTC](https://discuss.pynq.io/t/microblaze-on-pynq-z2/6443 "2023-12-15T09:04:50Z") **Posts on this page:** 3 **Page:** 1
### Author: ![Prashanthi\_Pathipati](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/prashanthi_pathipati/32/5466_2.png) [@Prashanthi\_Pathipati](https://discuss.pynq.io/u/Prashanthi_Pathipati) #### Post date: [December 15, 2023, 9:04am UTC](https://discuss.pynq.io/t/microblaze-on-pynq-z2/6443/1 "2023-12-15T09:04:50Z")
Hello, I have used microblaze ip instead of zynq on the pynq-z2 board to blink the leds ,below link is my refernce design [![](https://us1.discourse-cdn.com/flex019/uploads/pynq1/original/2X/4/4de8b96626a9d7839f8e14ab12185ab5b3a0d4cd.jpeg "Xilinx MicroBlaze Walkthrough") ](https://www.youtube.com/watch?v=J4g_RLGjU-4) when am coding from vitis ,am having this issue “Error while launching program: No ARM processor found in design. Cannot reset entire system. No ARM processor found in design. Cannot reset entire system.” could please give any sugesstions . Prashanthi P. ---
### Author: ![cathalmccabe](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/cathalmccabe/32/3348_2.png) [@cathalmccabe](https://discuss.pynq.io/u/cathalmccabe) #### Post date: [December 18, 2023, 9:34am UTC](https://discuss.pynq.io/t/microblaze-on-pynq-z2/6443/2 "2023-12-18T09:34:09Z")
This isn’t a PYNQ question. You should post on the [AMD (Xilinx) forums](https://support.xilinx.com/s/?language=en_US). Cathal ---
### Author: ![marioruiz](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/marioruiz/32/2177_2.png) [@marioruiz](https://discuss.pynq.io/u/marioruiz) #### Post date: [December 18, 2023, 2:04pm UTC](https://discuss.pynq.io/t/microblaze-on-pynq-z2/6443/3 "2023-12-18T14:04:37Z")