# MIPI AR1335 IAS support
**URL:** https://discuss.pynq.io/t/mipi-ar1335-ias-support/5798
**Category:** Community corner
**Created:** [July 10, 2023, 9:29am UTC](https://discuss.pynq.io/t/mipi-ar1335-ias-support/5798 "2023-07-10T09:29:05Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@Ricardo\_Tapiador](https://discuss.pynq.io/u/Ricardo_Tapiador)
#### Post date: [July 10, 2023, 9:29am UTC](https://discuss.pynq.io/t/mipi-ar1335-ias-support/5798/1 "2023-07-10T09:29:05Z")
Hello,
I have seen many examples using PCAM on Pynq, I am wondering if for KV260 the AR1335 sensor is supported on pynq. I want to read the pixels from the sensor, and after processing them with a vitis vision modules read the output in pythons.
I am wondering if there is an example with the AR1335 sensor. if someone can guide me, I would appreciate.
Kind regards
---
### Author:  [@marioruiz](https://discuss.pynq.io/u/marioruiz)
#### Post date: [July 10, 2023, 11:30am UTC](https://discuss.pynq.io/t/mipi-ar1335-ias-support/5798/2 "2023-07-10T11:30:11Z")
Hi @Ricardo_Tapiador,
No, this sensor is not supported by PYNQ.
Some of the apps available for Kria support this sensor.
Please, check out the accelerated applications
> **[Kria KV260 Vision AI Starter Kit](https://www.xilinx.com/products/som/kria/kv260-vision-starter-kit.html#applications)**
>
> The development platform for Kria K26 SOMs, the KV260 is built for advanced vision application development without requiring complex hardware design knowledge. Power supply sold separately.
Mario
---
### Author:  [@Ricardo\_Tapiador](https://discuss.pynq.io/u/Ricardo_Tapiador)
#### Post date: [July 10, 2023, 11:55am UTC](https://discuss.pynq.io/t/mipi-ar1335-ias-support/5798/3 "2023-07-10T11:55:16Z")
Hi @marioruiz ,
Thank you very much for your answer, Would it be possible to configure the sensor via I2C, and read the frames through VDMA?
I am new to PYNQ, but if it is similar as petalinux, I think we could do that.
---
### Author:  [@marioruiz](https://discuss.pynq.io/u/marioruiz)
#### Post date: [July 10, 2023, 12:36pm UTC](https://discuss.pynq.io/t/mipi-ar1335-ias-support/5798/4 "2023-07-10T12:36:59Z")
Hi @Ricardo_Tapiador,
Yes, this should be possible. I believe that you can find the designs on Xilinx Github.
Mario
---
### Author:  [@briansune](https://discuss.pynq.io/u/briansune)
#### Post date: [July 11, 2023, 2:15am UTC](https://discuss.pynq.io/t/mipi-ar1335-ias-support/5798/5 "2023-07-11T02:15:33Z")
@Ricardo_Tapiador
Feel free to reuse these examples:
> **[GitHub - briansune/Kintex-7-IMX291-Verilog: Kintex-7-IMX291-Verilog](https://github.com/briansune/Kintex-7-IMX291-Verilog)**
>
> Kintex-7-IMX291-Verilog. Contribute to briansune/Kintex-7-IMX291-Verilog development by creating an account on GitHub.
> **[GitHub - briansune/Kintex-7-OV13850-Verilog: kintex7 ov13850 fpga mipi camera](https://github.com/briansune/Kintex-7-OV13850-Verilog)**
>
> kintex7 ov13850 fpga mipi camera. Contribute to briansune/Kintex-7-OV13850-Verilog development by creating an account on GitHub.
> **[GitHub - briansune/Kintex-7-OV4689-Verilog: Xilinx Kintex-7 based OV4689 MIPI...](https://github.com/briansune/Kintex-7-OV4689-Verilog)**
>
> Xilinx Kintex-7 based OV4689 MIPI Camera Example. Contribute to briansune/Kintex-7-OV4689-Verilog development by creating an account on GitHub.
It is based on MIPI-CIS2.
ENJOY~
---
### Author:  [@juanppalacios](https://discuss.pynq.io/u/juanppalacios)
#### Post date: [June 6, 2024, 2:28am UTC](https://discuss.pynq.io/t/mipi-ar1335-ias-support/5798/6 "2024-06-06T02:28:39Z")
Hi,
Were you able to get the AR1335 sensor to work by any chance?
Regards,