# Phase jump with ADC acquisition on RFSOC board

**URL:** <https://discuss.pynq.io/t/phase-jump-with-adc-acquisition-on-rfsoc-board/5721>\
**Category:** Support\
**Created:** [June 20, 2023, 12:07pm UTC](https://discuss.pynq.io/t/phase-jump-with-adc-acquisition-on-rfsoc-board/5721 "2023-06-20T12:07:42Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![marioruiz](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/marioruiz/32/2177_2.png) [@marioruiz](https://discuss.pynq.io/u/marioruiz)\
**Post date:** [June 20, 2023, 1:14pm UTC](https://discuss.pynq.io/t/phase-jump-with-adc-acquisition-on-rfsoc-board/5721/2 "2023-06-20T13:14:57Z")

</div>

Hi @Federico,

Welcome to the PYNQ community.

This topic has been discussed previously here

> [@Store data from PL (ADC) to PS via DMA in ZCU111](https://discuss.pynq.io/t/store-data-from-pl-adc-to-ps-via-dma-in-zcu111/4928):
>
> Hi there! I am Jorge. I am currently developing software/hardware with the ZCU111 board. I am using PYNQ version 2.7. My goal is the following: I am acquiring an RF signal through the ADC on the PL and I want to receive it on the PS. For this, I have used the following schematic: SCHEMATIC: AXI DMA block config: Subset Converter block config: FIFO block config: At the moment, I am only using one channel. The RF Data Converter acquires the signa…

Best,  
Mario

---

_[View the full topic](https://discuss.pynq.io/t/phase-jump-with-adc-acquisition-on-rfsoc-board/5721)._