# Pynq 2.6 build for zcu102 **URL:** \ **Category:** Support\ **Created:** [April 14, 2022, 10:08pm UTC](https://discuss.pynq.io/t/pynq-2-6-build-for-zcu102/4044 "2022-04-14T22:08:41Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![jooeun526](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/jooeun526/32/3020_2.png) [@jooeun526](https://discuss.pynq.io/u/jooeun526)\ **Post date:** [April 14, 2022, 10:08pm UTC](https://discuss.pynq.io/t/pynq-2-6-build-for-zcu102/4044/1 "2022-04-14T22:08:41Z")
Hello, I am building Pynq 2.6 on ZCU102 with [Xilinx ZCU102向けPYNQビルドと確認(v2.6対応) - Qiita](https://qiita.com/tethys_seesaa/items/07fb1b2f6e3a6f582782) But, I get some problem when running make BOARD=ZCU102 **Initialising tasks: 100% |##############################################################################################################| Time: 0:00:00** **Checking sstate mirror object availability: 100% |######################################################################################| ETA: 0:00:00** In this state, they did not proceed any further. I waited over 12 hours and tried in various ways, but the results were the same. Also, to resolve the sstate-cache delay, I downloaded it from the Xilinx and placed it in the , but it had no other effect. Is there any way to proceed further from the above? Or is there a way to get a pynq-image or boot.bin with image.db for zcu102? ---
**Author:** ![skalade](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/skalade/32/686_2.png) [@skalade](https://discuss.pynq.io/u/skalade)\ **Post date:** [April 14, 2022, 10:38pm UTC](https://discuss.pynq.io/t/pynq-2-6-build-for-zcu102/4044/2 "2022-04-14T22:38:13Z")
Hi there, Is there are reason you are using 2.6 instead of 2.7? It should be BOARDS instead of BOARD, and you should specify the BOARDDIR for your custom board folder. I highly recommend you use the PREBUILT and PYNQ\_SDIST flags in your make call as well. If you are sticking with 2.6, the download link for the board agnostic PYNQ 2.6 image can be found in [this forum post](https://discuss.pynq.io/t/how-to-download-pynq-rootfs-aarch64-v2-6/3926) and the PYNQ 2.6 source distribution [here](https://github.com/Xilinx/PYNQ/releases/download/v2.6.0/pynq-2.6.0.tar.gz). then ```auto make BOARDDIR=/full/path/to/your/boarddir PYNQ_SDIST=downloaded_sdist PREBUILT=downloaded_image BOARDS=ZCU102 ``` If building more up to date 2.7 images, you can find the sdist in the [release](https://github.com/Xilinx/PYNQ/releases/tag/v2.7.0) and the board agnostic rootfs image on the pynq website under [boards](http://www.pynq.io/board.html). Thanks Shawn ---
**Author:** ![jooeun526](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/jooeun526/32/3020_2.png) [@jooeun526](https://discuss.pynq.io/u/jooeun526)\ **Post date:** [April 15, 2022, 7:07am UTC](https://discuss.pynq.io/t/pynq-2-6-build-for-zcu102/4044/3 "2022-04-15T07:07:34Z")
> [@skalade](#): > > `PYNQ_SDIST` Thank you for your very kind reply. The reason for using 2.6 was that there was a case where 2.6 version was completed. If 2.7 is possible, I will apply it. Additionally, Could I know the specific filename of which file is included in PYNQ\_SDIST in the part you uploaded? Thank you very much. ---
**Author:** ![jooeun526](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/jooeun526/32/3020_2.png) [@jooeun526](https://discuss.pynq.io/u/jooeun526)\ **Post date:** [April 15, 2022, 7:10am UTC](https://discuss.pynq.io/t/pynq-2-6-build-for-zcu102/4044/4 "2022-04-15T07:10:49Z")
> [@skalade](#): > > `downloaded_sdist ` I found it. This is the \ you posted ---
**Author:** ![jooeun526](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/jooeun526/32/3020_2.png) [@jooeun526](https://discuss.pynq.io/u/jooeun526)\ **Post date:** [April 15, 2022, 7:38am UTC](https://discuss.pynq.io/t/pynq-2-6-build-for-zcu102/4044/5 "2022-04-15T07:38:58Z")
Hello. There is no further change from the state below, is there any other solution? My environment is Vitis 2020.1, Petalinux 2020.1 (same to 2.6) with Intel Zeon 64 core Also, I hane Vitis 2020.2 Petalinux 2020.2 (same to 2.7) **PYNQ\_BOARDNAME=ZCU102 FPGA\_MANAGER=1 petalinux-build -c device-tree -p /home/jueun/Downloads/PYNQ\_7/sdbuild/build/ZCU102/petalinux\_project** **INFO: sourcing build tools** **[INFO] building device-tree** **[INFO] sourcing build environment** **[INFO] generating user layers** **[INFO] generating workspace directory** **INFO: bitbake virtual/dtb** **Parsing recipes: 100% |#################################################################################################################| Time: 0:00:18** **Parsing of 2964 .bb files complete (0 cached, 2964 parsed). 4235 targets, 210 skipped, 0 masked, 0 errors.** **NOTE: Resolving any missing task queue dependencies** **NOTE: Fetching uninative binary shim from file:///home/jueun/Downloads/PYNQ\_7/sdbuild/build/ZCU102/petalinux\_project/components/yocto/downloads/uninative/9498d8bba047499999a7310ac2576d0796461184965351a56f6d32c888a1f216/x86\_64-nativesdk-libc.tar.xz;sha256sum=9498d8bba047499999a7310ac2576d0796461184965351a56f6d32c888a1f216** **Initialising tasks: 100% |##############################################################################################################| Time: 0:00:01** **Checking sstate mirror object availability: 100% |######################################################################################| ETA: 0:00:00** ---
**Author:** ![jooeun526](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/jooeun526/32/3020_2.png) [@jooeun526](https://discuss.pynq.io/u/jooeun526)\ **Post date:** [April 15, 2022, 12:24pm UTC](https://discuss.pynq.io/t/pynq-2-6-build-for-zcu102/4044/7 "2022-04-15T12:24:47Z")
Thank you for your contribution. I solved this. Thank you!!