# PYNQ on ZCU102 device tree

**URL:** <https://discuss.pynq.io/t/pynq-on-zcu102-device-tree/3527>\
**Category:** Support\
**Created:** [January 11, 2022, 12:39pm UTC](https://discuss.pynq.io/t/pynq-on-zcu102-device-tree/3527 "2022-01-11T12:39:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Christian\_Karle](https://avatars.discourse-cdn.com/v4/letter/c/8797f3/32.png) [@Christian\_Karle](https://discuss.pynq.io/u/Christian_Karle)\
**Post date:** [January 11, 2022, 12:39pm UTC](https://discuss.pynq.io/t/pynq-on-zcu102-device-tree/3527/1 "2022-01-11T12:39:53Z")

</div>

Hi,

I want to run PYNQ on the ZCU102. I have created a new PetaLinux 2021.1 project with the BSP file and included meta-xilinx-pynq layer.

When I boot my system there is a device tree error, saying that the overlay could not be applied (fabric device)  
pynq\_zynqmp\_symbol.dtsi  
pynq\_zynqmp.dtsi

How do I need to change this files? Also there is no node called amba in the petalinux generated devicetree.

Thanks  
Christian