# Run pynq/lstm on zedboard while it is suported only on pynq-z1

**URL:** <https://discuss.pynq.io/t/run-pynq-lstm-on-zedboard-while-it-is-suported-only-on-pynq-z1/224>\
**Category:** Support\
**Created:** [June 19, 2019, 6:19am UTC](https://discuss.pynq.io/t/run-pynq-lstm-on-zedboard-while-it-is-suported-only-on-pynq-z1/224 "2019-06-19T06:19:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ambarish](https://avatars.discourse-cdn.com/v4/letter/a/919ad9/32.png) [@ambarish](https://discuss.pynq.io/u/ambarish)\
**Post date:** [June 19, 2019, 6:19am UTC](https://discuss.pynq.io/t/run-pynq-lstm-on-zedboard-while-it-is-suported-only-on-pynq-z1/224/1 "2019-06-19T06:19:17Z")

</div>

I have installed the pynq image on my zedboard.  
I want to run the pynq/lstm optical character recognition on my zedboard. So i have rebuilt the hardware in vivado and i have the ip. Now to run it on my zedboard, what changes should i make?  
I understand i need to change the xdc files and the pins to ones on zedboard.  
Is there any shortcut for all this.  
Please explain what should be done.

---

<div class="post-metadata">

**Author:** ![Earl\_Bezos](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/earl_bezos/32/98_2.png) [@Earl\_Bezos](https://discuss.pynq.io/u/Earl_Bezos)\
**Post date:** [June 19, 2019, 7:34am UTC](https://discuss.pynq.io/t/run-pynq-lstm-on-zedboard-while-it-is-suported-only-on-pynq-z1/224/2 "2019-06-19T07:34:59Z")

</div>

the boot.bin the devicetree and the uImage should be remake for the zed.as for the file system, you can use the pynq file system.