# Send data from PYNQ Z1 to PC

**URL:** <https://discuss.pynq.io/t/send-data-from-pynq-z1-to-pc/1685>\
**Category:** Support\
**Created:** [August 26, 2020, 8:19am UTC](https://discuss.pynq.io/t/send-data-from-pynq-z1-to-pc/1685 "2020-08-26T08:19:57Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![anoir\_nechi](https://avatars.discourse-cdn.com/v4/letter/a/bbe5ce/32.png) [@anoir\_nechi](https://discuss.pynq.io/u/anoir_nechi)\
**Post date:** [August 27, 2020, 10:11am UTC](https://discuss.pynq.io/t/send-data-from-pynq-z1-to-pc/1685/3 "2020-08-27T10:11:31Z")

</div>

Thank you for your answer.  
I know that using Ethernet or UART is easier. But I am following the specifics of a project, where I am supposed to get data from a sensor via Ethernet, do some accelerated processing, and transfer it to a PC via USB.  
In the Z1 board, there is the USB host and I can see that maybe I can handle it with some libraries like libusb or pyusb. But I could not install these packages as I mentioned in this [issue](https://discuss.pynq.io/t/certificate-verify-failed-while-installing-libusb-or-pyusb/1688)

---

_[View the full topic](https://discuss.pynq.io/t/send-data-from-pynq-z1-to-pc/1685)._