# Trouble running sdbuild for ZCU111 **URL:** \ **Category:** Support\ **Created:** [March 21, 2020, 4:55pm UTC](https://discuss.pynq.io/t/trouble-running-sdbuild-for-zcu111/1047 "2020-03-21T16:55:09Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![jmcoreymv](https://avatars.discourse-cdn.com/v4/letter/j/919ad9/32.png) [@jmcoreymv](https://discuss.pynq.io/u/jmcoreymv)\ **Post date:** [March 21, 2020, 4:55pm UTC](https://discuss.pynq.io/t/trouble-running-sdbuild-for-zcu111/1047/1 "2020-03-21T16:55:09Z")
I’ve been using the Pynq v2.5 image for my ZCU111 board for a number of months now and want to start building my own custom pynq image in preparation for a custom board being designed. I followed the Pynq steps for setting up the build machine environment (including using Vagrant+Virtualbox), and I pulled the ZCU111 board files from the Xilinx PYNQ-ZCU111 repo into my boards/ directory, along with downloading the ZCU111 Petalinux 2019.1 BSP. My build environment is running Ubuntu 18.04, with the Xilinx 2019.1 tools. I kickoff a build by switching to the sdbuild directory and typing: make BOARDS=ZCU111. The process starts fine and runs for some number of hours before eventually failing out towards the end of the bitstream generation process. I notice that it seems to be targetting the ZCU104 board at this point instead of the ZCU111 as well. This is the tail end of the log where it fails. bd\_e030\_v\_axi4s\_vid\_out\_0\_synth\_1: /workspace/proj/sdbuild/build/PYNQ/boards/ZCU104/base/base/base.runs/bd\_e030\_v\_axi4s\_vid\_out\_0\_synth\_1/runme.log bd\_e030\_util\_vector\_logic\_0\_0\_synth\_1: /workspace/proj/sdbuild/build/PYNQ/boards/ZCU104/base/base/base.runs/bd\_e030\_util\_vector\_logic\_0\_0\_synth\_1/runme.log bd\_e030\_axi\_crossbar\_0\_synth\_1: /workspace/proj/sdbuild/build/PYNQ/boards/ZCU104/base/base/base.runs/bd\_e030\_axi\_crossbar\_0\_synth\_1/runme.log synth\_1: /workspace/proj/sdbuild/build/PYNQ/boards/ZCU104/base/base/base.runs/synth\_1/runme.log [Sat Mar 21 07:17:36 2020] Launched impl\_1… Run output will be captured here: /workspace/proj/sdbuild/build/PYNQ/boards/ZCU104/base/base/base.runs/impl\_1/runme.log launch\_runs: Time (s): cpu = 00:01:42 ; elapsed = 00:02:05 . Memory (MB): peak = 2862.246 ; gain = 1172.809 ; free physical = 1247 ; free virtual = 5514 [Sat Mar 21 07:17:36 2020] Waiting for impl\_1 to finish… [Sat Mar 21 09:53:04 2020] impl\_1 finished wait\_on\_run: Time (s): cpu = 00:02:12 ; elapsed = 02:35:28 . Memory (MB): peak = 2862.246 ; gain = 0.000 ; free physical = 5111 ; free virtual = 6091 error copying “./base/base.runs/impl\_1/base\_wrapper.bit”: no such file or directory while executing “file copy -force ./${overlay\_name}/${overlay\_name}.runs/impl\_1/${design\_name}\_wrapper.bit ${overlay\_name}.bit” (file “build\_bitstream.tcl” line 25) INFO: [Common 17-206] Exiting Vivado at Sat Mar 21 09:53:05 2020… makefile:16: recipe for target ‘bitstream’ failed make[1]: \*\*\* [bitstream] Error 1 make[1]: Leaving directory ‘/workspace/proj/sdbuild/build/PYNQ/boards/ZCU104/base’ - unmount\_special - for fs in $fss - sudo umount -l /workspace/proj/sdbuild/build/bionic.aarch64/proc - for fs in $fss - sudo umount -l /workspace/proj/sdbuild/build/bionic.aarch64/run - for fs in $fss - sudo umount -l /workspace/proj/sdbuild/build/bionic.aarch64/dev - sudo umount -l /workspace/proj/sdbuild/build/bionic.aarch64/ccache - rmdir /workspace/proj/sdbuild/build/bionic.aarch64/ccache Makefile:325: recipe for target ‘/workspace/proj/sdbuild/output/bionic.aarch64.2.5.img’ failed make: \*\*\* [/workspace/proj/sdbuild/output/bionic.aarch64.2.5.img] Error 2 vagrant@wilkins-build-srv:/workspace/proj/sdbuild$ Any ideas how I can resolve this? ---
**Author:** ![rock](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/rock/32/32_2.png) [@rock](https://discuss.pynq.io/u/rock)\ **Post date:** [March 23, 2020, 4:09pm UTC](https://discuss.pynq.io/t/trouble-running-sdbuild-for-zcu111/1047/2 "2020-03-23T16:09:46Z")
This is because the building process requires the pynq sdist to be built, which in turn builds the zcu104 bitstream as well as z1 and z2 bitstreams. I think you can use ```auto make BOARDDIR= PYNQ_SDIST= ``` `pynq.tar.gz` can be downloaded at: [pynq · PyPI](https://pypi.org/project/pynq/#files)