# Tutorial: PYNQ DMA (Part 2: Using the DMA from PYNQ)

**URL:** <https://discuss.pynq.io/t/tutorial-pynq-dma-part-2-using-the-dma-from-pynq/3134>\
**Category:** Learn\
**Created:** [October 13, 2021, 1:51pm UTC](https://discuss.pynq.io/t/tutorial-pynq-dma-part-2-using-the-dma-from-pynq/3134 "2021-10-13T13:51:02Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![cathalmccabe](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/cathalmccabe/32/3348_2.png) [@cathalmccabe](https://discuss.pynq.io/u/cathalmccabe)\
**Post date:** [December 26, 2021, 5:37pm UTC](https://discuss.pynq.io/t/tutorial-pynq-dma-part-2-using-the-dma-from-pynq/3134/3 "2021-12-26T17:37:41Z")

</div>

This is correct, but this comment isn’t really relevant for this part of this tutorial. There is a separate tutorial on (using a HLS stream IP with DMA)[[Tutorial: using a HLS stream IP with DMA (Part 1: HLS design)](https://discuss.pynq.io/t/tutorial-using-a-hls-stream-ip-with-dma-part-1-hls-design/3344)] which covers TLAST.

TLAST was also mentioned when discussing the hardware design in the first part of this tutorial: [PYNQ DMA tutorial (Part 1: Hardware design)](https://discuss.pynq.io/t/pynq-dma-tutorial-part-1-hardware-design/3133).

Cathal

---

_[View the full topic](https://discuss.pynq.io/t/tutorial-pynq-dma-part-2-using-the-dma-from-pynq/3134)._