# Use pynq in xilinx zedboard

**URL:** <https://discuss.pynq.io/t/use-pynq-in-xilinx-zedboard/169>\
**Category:** Support\
**Created:** [June 4, 2019, 3:12pm UTC](https://discuss.pynq.io/t/use-pynq-in-xilinx-zedboard/169 "2019-06-04T15:12:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ambarish](https://avatars.discourse-cdn.com/v4/letter/a/919ad9/32.png) [@ambarish](https://discuss.pynq.io/u/ambarish)\
**Post date:** [June 4, 2019, 3:13pm UTC](https://discuss.pynq.io/t/use-pynq-in-xilinx-zedboard/169/1 "2019-06-04T15:13:00Z")

</div>

The PYNQ-Z1 and PYNQ-Z2 are having image files which can be loaded into the sdcard of the board. But i want to do the same for a Xilinx Zedboard (ZYNQ-7000) . I have downloaded the Xilinx Vivado 2018.3, and same versions of sdX and petalinux. I have installed these webpacks in UBUNTU.

After this I am a bit confused. I have also downloaded the zedboard BSP file of 2018.3 version.  
Please guide me after this.

---

<div class="post-metadata">

**Author:** ![gpcus](https://sea1.discourse-cdn.com/flex019/user_avatar/discuss.pynq.io/gpcus/32/54_2.png) [@gpcus](https://discuss.pynq.io/u/gpcus)\
**Post date:** [June 5, 2019, 7:39am UTC](https://discuss.pynq.io/t/use-pynq-in-xilinx-zedboard/169/2 "2019-06-05T07:39:00Z")

</div>

Hello Ambarish,  
I replied to you in another thread in detail, but this [link](https://pynq.readthedocs.io/en/latest/pynq_sd_card.html#pynq-sd-card) explains how to proceed from the bsp very clearly, IMHO, if you wish to do so.  
Best regards