# ZCU208 PYNQ Support

**URL:** <https://discuss.pynq.io/t/zcu208-pynq-support/3813>\
**Category:** Support\
**Created:** [March 9, 2022, 8:51pm UTC](https://discuss.pynq.io/t/zcu208-pynq-support/3813 "2022-03-09T20:51:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![johnsmith](https://avatars.discourse-cdn.com/v4/letter/j/d9b06d/32.png) [@johnsmith](https://discuss.pynq.io/u/johnsmith)\
**Post date:** [March 9, 2022, 8:51pm UTC](https://discuss.pynq.io/t/zcu208-pynq-support/3813/1 "2022-03-09T20:51:28Z")

</div>

I’m looking for a pre-built PYNQ package that will run natively on the ZCU208. Has anyone successfully ported PYNQ to a ZCU208? If anyone has, can you share what you had to do and/or post your configuration file changes and procedures? I was considering starting with the ZCU211 port and make changes to that, but if someone has already done a complete ZCU208 port I’d appreciate if you could share what you did. I see others on here were looking for ZCU208 support, as well. Thank you in advance.