For the license part there are nothing we can do to help as this is a must to use high-density series FPGA
on Xilinx.
However, the building part I can help, vargrant is a really unpredicted method!
Here is a welly known method that stable enough for others to follow and repeat without major hazard:
Follow this link for build command usage:
https://pynq.readthedocs.io/en/latest/pynq_sd_card.html
Follow this link for setting up the build environment:
Unless people having hard time on setting up the environment:
Vagrant is not a good method to setup the SD build environment.
I have not investigate to the bottom but what previous engineer shows there might Virtual R/W issue during such setup.
STEPS:
I will suggest download 18.04.06 LTS Ubuntu from official website
Create a virtual disk size about 200GB or more, set the CPU >#4, RAM >#8192
Update Ubuntu packages before setting up the PYNQ
3b) Git clone the PYNQ to /home//PYNQ
3c) sudo ch…
Follow this link to see what need to pay attention during Ultra-Scale series ZYNQ build:
Problem solve:
Indeed the boot arg is not default edited by the make script on the PYNQ.
I not even notice this is the case as once it stuck I had no idea how I can get the log why and what reason it is stucking.
Maybe Sarunas you can advise a bit how we can debug the root cause it is stuck.
Starting Samba NMB Daemon...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Started Unattended Upgrades Shutdown.
[ OK ] Finished Permit U…
Remember read the post completely and understand before you execute each part.
Enjoy ~
1 Like