Hello, I wanted to try some projects on pynq-z2. So, tried cloning some one of the github repos : GitHub - PaiPai121/Defocus-Image-Deblurring-Based-on-PYNQ But, it throws the following error: [image] Can anyone help?

git clone throws this error: [image]

This is not a pip error as shown in the initial line. The error is either one of the two things: The package is too big for the current memory on pynq-z2. (512MB DRAM on the current board) The internet is not connected on your board (try the command ping www.google.com for clarity on whether the…

Hi, The error Could not resolve host : github.com would indicate that your board is not connected to the Internet as @abdyoyo suggests. Mario

Thanks @abdyoyo and @marioruiz for replying. As you said, board is not connected to internet. So, can you help me with that. I have tried different things but nothing worked. My computer is connected to internet through wifi and to board through ethernet cable. Please suggest.

Have you tried the pynq board with another system/PC? The issue might be from the PC end, initializing the ethernet config/initial conditions. Can you just share the ipconfig cli output from PC and from the pynq OS?

No, I didnot try with other PC. From PC: C:\Users\PRM>ipconfig Windows IP Configuration Ethernet adapter Ethernet: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::85f6:78d8:d84f:dba7%18 IPv4 Address. . . . . . . . . . . : 192.168.2.1 Subnet Mask . . . . . . . . …

My computer is connected to internet through wifi and to board through ethernet cable. Please suggest. Your board is not connected to the internet. You only have a direct connection to your PC. Can you connect your board to a port on your router using the Ethernet cable? You then need to find th…

thanks for replying @cathalmccabe [image] cathalmccabe: Can you connect your board to a port on your router using the Ethernet cable? I am using my college’s LAN which needs authentication after connection. So, it won’t be possible for me to connect board through ethernet cable. Is there an…

What type of authentication? For connecting to the network, you can think of the PYNQ-Z2 board as a Linux (Ubuntu based) computer. If you can authenticate a Linux machine on the LAN then you should be able to do the same with the PYNQ-Z1 board. You could try google on Ubuntu forums for how to do t…

We can authenticate through GUI on linux but not through terminal. Is there any other way or running internet on pynq-z2 directly through the computer or using wifi dongle? note: I am also struggling to use usb wifi ( Pynq-z2 cannot connect to internet through USB wifi ) Any suggestions?

Cannot git clone on pynq z2

Support

Ghani December 13, 2021, 12:14am 13

Please refer to this you may find it helpful: Cloning a git repository into your board connected to computer

Topic		Replies	Views
Pynq z1 internet connection Support	9	2283	August 17, 2022
Could not resolve host: github.com Support	7	2570	October 2, 2022
Error install HelloWorld Support	3	869	November 1, 2019
Ping: ports.ubuntu.com: Temporary failure in name resolution Support	4	1260	April 26, 2021
Internet access for PYNQ Z2 Support	3	1518	September 11, 2023

Cannot git clone on pynq z2

Related topics