Do you have a work around for IIC addresses larger than 8 bit as imx219 (RPI Cam V2) needs to be configured using 16bit addresses. OverflowError Traceback (most recent call last) in ----> 1 test.send(0x479B, 0x05, 8, 0) /usr/local/share/pynq-venv/lib/python3.8/site-packages/pynq/lib/iic.py in s…

Hi, it seems that your device is not answering. it could be for different reasons. Things to do to debug this situation: Try with all addresses (protip: use try - except) Use a logic analyzer to see what’s going on on the wire Kind regards, Marin Mikaël

IIC 16 bit address pynq.lib.iic

Support

JackBonnellDev April 14, 2022, 1:15pm 4

Thanks i’ve taken your advice but im still struggling to get it to run any ideas?

Initalising MIPI IP Block with PYNQ

Topic		Replies	Views
How to use I2C with Pynq Z1? Support	4	3007	March 19, 2020
Introduction on IIC and GPIO on PYNQ Support	6	723	October 19, 2023
Could not send I2C data - Axi IIC Support	1	1694	November 17, 2021
How to use pynq.lib.iic.AxiIIC? Support	4	991	April 12, 2021
Read iic data kv260 Support	2	397	September 16, 2022

IIC 16 bit address pynq.lib.iic

Related Topics