Issue with PYNQ Overlay Load Failing via systemd Service on Zynq-7000 (XC7Z020)

[marioruiz]

Hi @maximilianbeutel

Welcome to the PYNQ community.
The service should be run as root which is where the pynq env is installed.

If this still fails, you may want to source the env.

See related issues:

Pynq z2: no module named pynq

PYNQ is installed in a virtual environment. To run a Python script you need to source the virtual environment first: source /etc/profile.d/pynq_venv.sh Cathal

Run python scripts in Pynq Environment

Hi @DiogoBaptista There is three steps to running PYNQ code from the command line: Make sure you are in sudo privileges (e.g. sudo su) Source the pynq venv environment source /etc/profile.d/pynq_venv.sh Source the xrt environment source /etc/profile.d/xrt_setup.sh You should now be in the right environment to run PYNQ code. You could put both source commands into a shell script which you can run whenever you want. Thanks, Josh

Mario