Pynq 2.7 built for non-official board cannot load overlays

[briansune]

@Ravencus

See this guide for compiling the image:

Stuck at extract yocoto

Unless people having hard time on setting up the environment: Vagrant is not a good method to setup the SD build environment. I have not investigate to the bottom but what previous engineer shows there might Virtual R/W issue during such setup. STEPS: I will suggest download 18.04.06 LTS Ubuntu from official website Create a virtual disk size about 200GB or more, set the CPU >#4, RAM >#8192 Update Ubuntu packages before setting up the PYNQ 3b) Git clone the PYNQ to /home//PYNQ 3c) sudo ch…

Enjoy~