Pynq-Z1 - Mapping Between GPIOs and Package Pins

Support
1

I am trying to edit the package pins of the default Pynq-Z1 BSP. In order to properly do the modification, I would like to know the default mapping between the Pynq-Z1 pins and the Package Pins that you can find in Vivado. I tried to go over the Pynq-Z1 documentation but there is no such information.
If you try to look at the contraints file (see below) that Vivado generates during the project setup by selecting the Pynq-z1 does not help much, except to know if a pin is related to the arduino or pmod region.

Thanks

Here below the contraint file:

## Switches
set_property -dict {PACKAGE_PIN M20 IOSTANDARD LVCMOS33} [get_ports {sws_2bits_tri_i[0]}]
set_property -dict {PACKAGE_PIN M19 IOSTANDARD LVCMOS33} [get_ports {sws_2bits_tri_i[1]}]

## Buttons
set_property -dict {PACKAGE_PIN D19 IOSTANDARD LVCMOS33} [get_ports {btns_4bits_tri_i[0]}]
set_property -dict {PACKAGE_PIN D20 IOSTANDARD LVCMOS33} [get_ports {btns_4bits_tri_i[1]}]
set_property -dict {PACKAGE_PIN L20 IOSTANDARD LVCMOS33} [get_ports {btns_4bits_tri_i[2]}]
set_property -dict {PACKAGE_PIN L19 IOSTANDARD LVCMOS33} [get_ports {btns_4bits_tri_i[3]}]

## LEDs
set_property -dict {PACKAGE_PIN R14 IOSTANDARD LVCMOS33} [get_ports {leds_4bits_tri_o[0]}]
set_property -dict {PACKAGE_PIN P14 IOSTANDARD LVCMOS33} [get_ports {leds_4bits_tri_o[1]}]
set_property -dict {PACKAGE_PIN N16 IOSTANDARD LVCMOS33} [get_ports {leds_4bits_tri_o[2]}]
set_property -dict {PACKAGE_PIN M14 IOSTANDARD LVCMOS33} [get_ports {leds_4bits_tri_o[3]}]

## RGBLEDs
set_property -dict { PACKAGE_PIN L15   IOSTANDARD LVCMOS33 } [get_ports { rgbleds_6bits_tri_o[0] }]; 
set_property -dict { PACKAGE_PIN G17   IOSTANDARD LVCMOS33 } [get_ports { rgbleds_6bits_tri_o[1] }]; 
set_property -dict { PACKAGE_PIN N15   IOSTANDARD LVCMOS33 } [get_ports { rgbleds_6bits_tri_o[2] }]; 
set_property -dict { PACKAGE_PIN G14   IOSTANDARD LVCMOS33 } [get_ports { rgbleds_6bits_tri_o[3] }];
set_property -dict { PACKAGE_PIN L14   IOSTANDARD LVCMOS33 } [get_ports { rgbleds_6bits_tri_o[4] }]; 
set_property -dict { PACKAGE_PIN M15   IOSTANDARD LVCMOS33 } [get_ports { rgbleds_6bits_tri_o[5] }]; 

## Audio
set_property -dict {PACKAGE_PIN F17 IOSTANDARD LVCMOS33} [get_ports {pdm_m_clk[0]}]
set_property -dict {PACKAGE_PIN G18 IOSTANDARD LVCMOS33} [get_ports pdm_m_data_i]
set_property -dict {PACKAGE_PIN R18 IOSTANDARD LVCMOS33} [get_ports {pwm_audio_o[0]}]
set_property -dict {PACKAGE_PIN T17 IOSTANDARD LVCMOS33} [get_ports {pdm_audio_shutdown[0]}]

# HDMI Signals
create_clock -period 8.334 -waveform {0.000 4.167} [get_ports hdmi_in_clk_p]
set_property -dict {PACKAGE_PIN P19 IOSTANDARD TMDS_33} [get_ports hdmi_in_clk_n]
set_property -dict {PACKAGE_PIN N18 IOSTANDARD TMDS_33} [get_ports hdmi_in_clk_p]
set_property -dict {PACKAGE_PIN W20 IOSTANDARD TMDS_33} [get_ports {hdmi_in_data_n[0]}]
set_property -dict {PACKAGE_PIN V20 IOSTANDARD TMDS_33} [get_ports {hdmi_in_data_p[0]}]
set_property -dict {PACKAGE_PIN U20 IOSTANDARD TMDS_33} [get_ports {hdmi_in_data_n[1]}]
set_property -dict {PACKAGE_PIN T20 IOSTANDARD TMDS_33} [get_ports {hdmi_in_data_p[1]}]
set_property -dict {PACKAGE_PIN P20 IOSTANDARD TMDS_33} [get_ports {hdmi_in_data_n[2]}]
set_property -dict {PACKAGE_PIN N20 IOSTANDARD TMDS_33} [get_ports {hdmi_in_data_p[2]}]
set_property -dict {PACKAGE_PIN T19 IOSTANDARD LVCMOS33} [get_ports {hdmi_in_hpd[0]}]
set_property -dict {PACKAGE_PIN U14 IOSTANDARD LVCMOS33} [get_ports hdmi_in_ddc_scl_io]
set_property -dict {PACKAGE_PIN U15 IOSTANDARD LVCMOS33} [get_ports hdmi_in_ddc_sda_io]
set_property -dict {PACKAGE_PIN L17 IOSTANDARD TMDS_33} [get_ports hdmi_out_clk_n]
set_property -dict {PACKAGE_PIN L16 IOSTANDARD TMDS_33} [get_ports hdmi_out_clk_p]
set_property -dict {PACKAGE_PIN K18 IOSTANDARD TMDS_33} [get_ports {hdmi_out_data_n[0]}]
set_property -dict {PACKAGE_PIN K17 IOSTANDARD TMDS_33} [get_ports {hdmi_out_data_p[0]}]
set_property -dict {PACKAGE_PIN J19 IOSTANDARD TMDS_33} [get_ports {hdmi_out_data_n[1]}]
set_property -dict {PACKAGE_PIN K19 IOSTANDARD TMDS_33} [get_ports {hdmi_out_data_p[1]}]
set_property -dict {PACKAGE_PIN H18 IOSTANDARD TMDS_33} [get_ports {hdmi_out_data_n[2]}]
set_property -dict {PACKAGE_PIN J18 IOSTANDARD TMDS_33} [get_ports {hdmi_out_data_p[2]}]
set_property -dict {PACKAGE_PIN R19 IOSTANDARD LVCMOS33} [get_ports {hdmi_out_hpd[0]}]
set_property -dict {PACKAGE_PIN M17 IOSTANDARD LVCMOS33} [get_ports hdmi_out_ddc_scl_io]
set_property -dict {PACKAGE_PIN M18 IOSTANDARD LVCMOS33} [get_ports hdmi_out_ddc_sda_io]

## Pmoda
set_property -dict {PACKAGE_PIN Y19 IOSTANDARD LVCMOS33} [get_ports {pmoda_gpio_tri_io[1]}]
set_property -dict {PACKAGE_PIN Y18 IOSTANDARD LVCMOS33} [get_ports {pmoda_gpio_tri_io[0]}]
set_property -dict {PACKAGE_PIN Y17 IOSTANDARD LVCMOS33} [get_ports {pmoda_gpio_tri_io[3]}]
set_property -dict {PACKAGE_PIN Y16 IOSTANDARD LVCMOS33} [get_ports {pmoda_gpio_tri_io[2]}]
set_property -dict {PACKAGE_PIN U19 IOSTANDARD LVCMOS33} [get_ports {pmoda_gpio_tri_io[5]}]
set_property -dict {PACKAGE_PIN U18 IOSTANDARD LVCMOS33} [get_ports {pmoda_gpio_tri_io[4]}]
set_property -dict {PACKAGE_PIN W19 IOSTANDARD LVCMOS33} [get_ports {pmoda_gpio_tri_io[7]}]
set_property -dict {PACKAGE_PIN W18 IOSTANDARD LVCMOS33} [get_ports {pmoda_gpio_tri_io[6]}]
set_property PULLUP true [get_ports {pmoda_gpio_tri_io[2]}]
set_property PULLUP true [get_ports {pmoda_gpio_tri_io[3]}]
set_property PULLUP true [get_ports {pmoda_gpio_tri_io[6]}]
set_property PULLUP true [get_ports {pmoda_gpio_tri_io[7]}]

## Pmodb
set_property -dict {PACKAGE_PIN Y14 IOSTANDARD LVCMOS33} [get_ports {pmodb_gpio_tri_io[1]}]
set_property -dict {PACKAGE_PIN W14 IOSTANDARD LVCMOS33} [get_ports {pmodb_gpio_tri_io[0]}]
set_property -dict {PACKAGE_PIN T10 IOSTANDARD LVCMOS33} [get_ports {pmodb_gpio_tri_io[3]}]
set_property -dict {PACKAGE_PIN T11 IOSTANDARD LVCMOS33} [get_ports {pmodb_gpio_tri_io[2]}]
set_property -dict {PACKAGE_PIN W16 IOSTANDARD LVCMOS33} [get_ports {pmodb_gpio_tri_io[5]}]
set_property -dict {PACKAGE_PIN V16 IOSTANDARD LVCMOS33} [get_ports {pmodb_gpio_tri_io[4]}]
set_property -dict {PACKAGE_PIN W13 IOSTANDARD LVCMOS33} [get_ports {pmodb_gpio_tri_io[7]}]
set_property -dict {PACKAGE_PIN V12 IOSTANDARD LVCMOS33} [get_ports {pmodb_gpio_tri_io[6]}]
set_property PULLUP true [get_ports {pmodb_gpio_tri_io[2]}]
set_property PULLUP true [get_ports {pmodb_gpio_tri_io[3]}]
set_property PULLUP true [get_ports {pmodb_gpio_tri_io[6]}]
set_property PULLUP true [get_ports {pmodb_gpio_tri_io[7]}]

## Arduino digital
set_property -dict {PACKAGE_PIN T14 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[0]}]
set_property -dict {PACKAGE_PIN U12 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[1]}]
set_property -dict {PACKAGE_PIN U13 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[2]}]
set_property -dict {PACKAGE_PIN V13 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[3]}]
set_property -dict {PACKAGE_PIN V15 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[4]}]
set_property -dict {PACKAGE_PIN T15 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[5]}]
set_property -dict {PACKAGE_PIN R16 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[6]}]
set_property -dict {PACKAGE_PIN U17 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[7]}]
set_property -dict {PACKAGE_PIN V17 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[8]}]
set_property -dict {PACKAGE_PIN V18 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[9]}]
set_property -dict {PACKAGE_PIN T16 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[10]}]
set_property -dict {PACKAGE_PIN R17 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[11]}]
set_property -dict {PACKAGE_PIN P18 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[12]}]
set_property -dict {PACKAGE_PIN N17 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[13]}]
set_property -dict {PACKAGE_PIN P16 IOSTANDARD LVCMOS33} [get_ports arduino_direct_iic_scl_io]
set_property -dict {PACKAGE_PIN P15 IOSTANDARD LVCMOS33} [get_ports arduino_direct_iic_sda_io]
set_property -dict {PACKAGE_PIN W15 IOSTANDARD LVCMOS33} [get_ports arduino_direct_spi_io1_io]
set_property -dict {PACKAGE_PIN T12 IOSTANDARD LVCMOS33} [get_ports arduino_direct_spi_io0_io]
set_property -dict {PACKAGE_PIN H15 IOSTANDARD LVCMOS33} [get_ports arduino_direct_spi_sck_io]
set_property -dict {PACKAGE_PIN F16 IOSTANDARD LVCMOS33} [get_ports arduino_direct_spi_ss_io]
set_property -dict {PACKAGE_PIN U10 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[19]}]
set_property -dict {PACKAGE_PIN T5 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[18]}]
set_property -dict {PACKAGE_PIN V11 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[17]}]
set_property -dict {PACKAGE_PIN W11 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[16]}]
set_property -dict {PACKAGE_PIN Y12 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[15]}]
set_property -dict {PACKAGE_PIN Y11 IOSTANDARD LVCMOS33} [get_ports {arduino_gpio_tri_io[14]}]

## Arduino analog
set_property -dict {PACKAGE_PIN D18 IOSTANDARD LVCMOS33} [get_ports Vaux1_v_n]
set_property -dict {PACKAGE_PIN E17 IOSTANDARD LVCMOS33} [get_ports Vaux1_v_p]
set_property -dict {PACKAGE_PIN E19 IOSTANDARD LVCMOS33} [get_ports Vaux9_v_n]
set_property -dict {PACKAGE_PIN E18 IOSTANDARD LVCMOS33} [get_ports Vaux9_v_p]
set_property -dict {PACKAGE_PIN J14 IOSTANDARD LVCMOS33} [get_ports Vaux6_v_n]
set_property -dict {PACKAGE_PIN K14 IOSTANDARD LVCMOS33} [get_ports Vaux6_v_p]
set_property -dict {PACKAGE_PIN J16 IOSTANDARD LVCMOS33} [get_ports Vaux15_v_n]
set_property -dict {PACKAGE_PIN K16 IOSTANDARD LVCMOS33} [get_ports Vaux15_v_p]
set_property -dict {PACKAGE_PIN H20 IOSTANDARD LVCMOS33} [get_ports Vaux5_v_n]
set_property -dict {PACKAGE_PIN J20 IOSTANDARD LVCMOS33} [get_ports Vaux5_v_p]
set_property -dict {PACKAGE_PIN G20 IOSTANDARD LVCMOS33} [get_ports Vaux13_v_n]
set_property -dict {PACKAGE_PIN G19 IOSTANDARD LVCMOS33} [get_ports Vaux13_v_p]

## ChipKit digital
set_property -dict { PACKAGE_PIN U5    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[0] }];
set_property -dict { PACKAGE_PIN V5    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[1] }];
set_property -dict { PACKAGE_PIN V6    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[2] }];
set_property -dict { PACKAGE_PIN U7    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[3] }];
set_property -dict { PACKAGE_PIN V7    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[4] }];
set_property -dict { PACKAGE_PIN U8    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[5] }];
set_property -dict { PACKAGE_PIN V8    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[6] }];
set_property -dict { PACKAGE_PIN V10   IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[7] }];
set_property -dict { PACKAGE_PIN W10   IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[8] }];
set_property -dict { PACKAGE_PIN W6    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[9] }];
set_property -dict { PACKAGE_PIN Y6    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[10] }];
set_property -dict { PACKAGE_PIN Y7    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[11] }];
set_property -dict { PACKAGE_PIN W8    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[12] }];
set_property -dict { PACKAGE_PIN Y8    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[13] }];
set_property -dict { PACKAGE_PIN W9    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[14] }];
set_property -dict { PACKAGE_PIN Y9    IOSTANDARD LVCMOS33 } [get_ports { ck_gpio_tri_io[15] }];

## ChipKit analog
set_property -dict { PACKAGE_PIN F19   IOSTANDARD LVCMOS33 } [get_ports Vaux12_v_p];
set_property -dict { PACKAGE_PIN F20   IOSTANDARD LVCMOS33 } [get_ports Vaux12_v_n];
set_property -dict { PACKAGE_PIN C20   IOSTANDARD LVCMOS33 } [get_ports Vaux0_v_p];
set_property -dict { PACKAGE_PIN B20   IOSTANDARD LVCMOS33 } [get_ports Vaux0_v_n];
set_property -dict { PACKAGE_PIN B19   IOSTANDARD LVCMOS33 } [get_ports Vaux8_v_p];
set_property -dict { PACKAGE_PIN A20   IOSTANDARD LVCMOS33 } [get_ports Vaux8_v_n];
2

For this you will have a look at the schematic. Check this page and look for the keyword schematic.

3

The reference manual also has the pin information:

Cathal

4

Thank you both for the support! I checked the two mentioned document in the past, but I could not find the information.

By combining the information present in the constraint file and the schematic (as suggested by @rock ) you can easily map the default configuration with the pins (some day ago I did not look at the schematic well enough to realize it). Even just the schematic is enough to map the pins properly.

@cathalmccabe, the PYNQ-Z1 reference manual partially covers the matter (I see HDMI, LEDs, buttons, mic PIN mapping and probably others) because, for example, it does not cover the Arduino shield (I was looking at the pins of this interface).

2 Likes