ADC input on Pynq-ZU

[Chaitanya_chaitu]

I am trying to give input to the ADC (system management wizard ip) block on pynq-zu board. I understood that the analog inputs can be given to Vp and Vn ports. But I am not able to find where these ports are present on the board?

[marioruiz]

Hi @Chaitanya_chaitu,

Welcome to the PYNQ community.

This has already been answer:

PYNQ ZU External Analog Input

Hi @Sai, it is mentioned as AB7, but cannot find the pin on the board. If you check the schematics, you’ll find that the 3-pin header is labeled as J14. This is the header between the fan and the SYZYGY Port A. Mario

You can find all the interfaces here: Board overview | XUP PYNQ-ZU

Mario