I got an error when using the PYNQ-ZU development board for yolov5 reasoning, how do I fix it

Support
1
  • Starting 4 threads…

WARNING: Logging before InitGoogleLogging() is written to STDERR

W0620 13:14:26.351315 2432 xrt_cu.cpp:188] cu timeout! device_core_idx 0 handle=0xaaaacdada910 ENV_PARAM(XLNX_DPU_TIMEOUT) 10000 state 1 ERT_CMD_STATE_COMPLETED 4 ms 10010 bo=1 is_done 0

I0620 13:14:26.351429 2432 xrt_cu.cpp:99] Total: 10010379us ToDriver: 18446743150476739us ToCU: 0us Complete: 0us Done: 933243191us

F0620 13:14:26.351469 2432 dpu_control_xrt_edge.cpp:186] dpu timeout! core_idx = 0

LSTART 0 LEND 0 CSTART 0 CEND 0 SSTART 1023 SEND 0 MSTART 1023 MEND 0 CYCLE_L 0 CYCLE_H 0

*** Check failure stack trace: ***

Aborted (core dumped)

2

(vitis-ai-pytorch) Vitis-AI /workspace/1/yolov5 > vai_c_xir -x ./quantize_result/DetectMultiBackend_int.xmodel -a arch_zuboard.json -o ./ -n model

Use this command to generate an Xmodel file and get an error.

Starting 1 threads…
WARNING: Logging before InitGoogleLogging() is written to STDERR
W0627 03:03:32.429781 1829 xrt_cu.cpp:188] cu timeout! device_core_idx 0 handle=0xaaaad05501b0 ENV_PARAM(XLNX_DPU_TIMEOUT) 10000 state 1 ERT_CMD_STATE_COMPLETED 4 ms 10010 bo=1 is_done 0
I0627 03:03:32.429903 1829 xrt_cu.cpp:99] Total: 10019743us ToDriver: 18446743623408429us ToCU: 0us Complete: 0usDone: 460320865us
F0627 03:03:32.429947 1829 dpu_control_xrt_edge.cpp:186] dpu timeout! core_idx = 0
LSTART 0 LEND 0 CSTART 0 CEND 0 SSTART 1023 SEND 0 MSTART 1023 MEND 0 CYCLE_L 0 CYCLE_H 0
*** Check failure stack

应该如何解决呢