PYNQ V2.7 SD image build fail for board PYNQ-Z2

[briansune]

Of cause, 100% on AMD Intel Windows 10.
I also tried a lot of additional variations overlay and composable:

Composable:

PYNQ Composable c_dict issue

Great I guess the install Readme can add more info. Enclosing the install here: Install Script.ipynb (1.8 KB)

Power On bit load:

Boot overlay or bit load after power up

Cathal I humbly thank you but 1st I am not sure why you using 2.5 old revision here . 2nd had you tried the 2.7 boot.py and the differences between the flag is set or not? I already generate both w and wo the FPGA_MANAGER_${BOARD} flag case. And the result already discussed on above. There are so many case that the initial boot bit needed in example HDMI or RTOS applications. Meantime how slow the after boot load time it is? (if you had experience on 2.7 boot.py overlay) What I see from t…

Reduction of SD build wo generate all other boards:

Pynq 2.7 for Zybo-Z7

Hi Brian, I hope you’re doing great :-). Issues could be present as each time you run the Makefile, git makes changes locally. To make sure the build.sh file is getting modified, you should check the ~/PYNQ/sdbuild/build/ directory and search for the build.sh copied there. Lines after the 105 are not needed (since they are forcing the Pynq repo to be cloned again for the Pynq-Z2 and compile the original overlays). One workaround could be to just delete those lines by hand. I’m sorry I can’t gu…