Hello, I try to build a custom PYNQ image for ZCU104 board to enable “AXI Quad SPI” interface which resides in my FPGA design by generating the corresponding device-tree-blob. I have followed this tutorial https://discuss.pynq.io/t/pynq-2-6-custom-board-image-build-method-that-works/2894 However,…

@kagdila See build guide: [image] PYNQ 3.0.1 VirtualBox install and SD build Learn Thank you PYNQ development team to releasing new 3.0.1 PYNQ. In this custom board build guide the PetaLinux, Vivado, Vitis are using version 2022.1 aka kernel 5.15. The NEW buil…

Thanks for your reply @briansune ; however, I do not think that the problem is about the project environment. My settings can reach out the path of the Xilinx programmes from /tools/Xilinx/ installation directory properly unlike your suggestion to install them into /home/PYNQ/xilinx path. I also do …

@kagdila I am not sure what are the root causes of such issue. However, my method do generate both Ultra Scale ZYNQ and ZYNQ Custom Board with no issue. So I am also delight to learn what are the reason your environment is failing. Before you had blinded by your perception. Did you really read t…

@briansune First, I did not claim that I have read anything about the version 2.7 . The tutorial that I have mentioned is written for version 2.6 . Second, you can easily find the directory name from your own post https://discuss.pynq.io/t/stuck-at-extract-yocoto/4134/8 under the STEPS title as 3C…

@kagdila So what are you talking about apple to orange? Well 3C is referring to git clone so you are wrongly interpreted (no wonder why you could build fail) chmod is far close to the metaphor you are referring, so simply speaking you have no clue on the number and the chmod really does. As 3 is n…

OK @briansune , you can now leave this post. I still look for friendly people who can read and understand my question to clarify the “make” process and collaborate on this topic.

Hi @kagdila , Rebuilding the pynq sdist builds the overlays for pynq-z1 and z2 boards (zynq7000 parts), as well as the zcu104, I assume you don’t have the zynq7000 devices installed on your machine which causes the error. With the 3.0.1 PYNQ sdbuild, if you’ve downloaded the prebuilt sdist and root…

@skalade Well~ I have no intention to argument from first place. However, when new member(s) like someone not specific to any body feels it is well known on it situation and yet not really finish reading the material (i.e. README of build guide) then response. Remember Shawn there is no place for …

Hi @skalade , As you mentioned, zynq7000 devices were not installed on my machine so installing them just solved the problem that I have mentioned. I also corrected the prebuilt sdist name as you emphasized. Now, I can execute the make command as below. ~$ make BOARDS=Pynq_Custom From my underst…

@skalade DTSI is not set properly, aka DTS → DTB would NOT exist any SPI in device tree. This is pure Linux build issue, nothing to do with PYNQ. You should able to set the device tree in the PYNQ GIT repository. And this no longer related to the original topic of PYNQ v3.0.1 build fail. Open n…

PYNQ v3.0.1 Build Failure for ZCU104

Support

briansune March 24, 2023, 12:55pm 2

@kagdila

See build guide:

Topic		Replies	Views
PYNQ build failed for custom board Support	12	1779	August 8, 2022
Pynq 2.6 custom board image build method that works Learn	4	6749	January 21, 2022
PYNQ Build on Custom Board freezes Support	6	1636	June 8, 2020
Building PYNQ 2.6 for ZCU104 Support	9	1903	March 4, 2021
PYNQ 2.7 custom board building error Support	5	1443	October 1, 2022

PYNQ v3.0.1 Build Failure for ZCU104

Related topics