PYNQ-Z2 DFX Issues with Vivado 2022.1

[briansune]

@mendes-davi

Thank you for pointing out, I just used 3.0.1 and 2.7 never even have notice 3.0.0 is in between HAHA =], but 3.0.1 during some testing startup is a bit touchy and slow so I keep using 2.7 until 3.1 or above is release (hope more stable and more bug is fixed).

In case you need 2.7 DFX guide I had make one:

PYNQ 2.7 DFX Partial Reconfiguration under Vivado 2020.2

Hello all, Introduction Due to limited support on the modulator(s) about example of DFX and procedure. I will try to share the DFX on PYNQ 2.7 flow and method that I think it is working. The goal is to provide a simplest and easiest start of DFX on PR. No “composite overlay”, no other installation just PYNQ default API. First we are targeting Vivado 2020.2 not 2020.2.# which is the same build revision of the PYNQ on SD Image. So the first element is to make sure it is aligning both SD ima…

ENJOY~