Sharing buffer address with programmable logic

[marioruiz]

Hi @pynquser,

Welcome to the PYNQ community.

I suggest you check out these tutorials:

Tutorial: PYNQ DMA (Part 1: Hardware design)

PYNQ DMA tutorial (Part 1: Hardware design) This tutorial will show you how to use the Xilinx AXI DMA with PYNQ. It will cover adding the AXI DMA to a new Vivado hardware design and show how the DMA can be controlled from PYNQ. This tutorial is based on the v2.6 PYNQ image and will use Vivado 2020.1. If you are using a different PYNQ version you should be able to follow the same steps in this tutorial, but you should make sure you are using the supported version of Vivado for that PYNQ release. …

Tutorial: AXI Master interfaces with HLS IP

PYNQ HLS AXI Master tutorial Introduction Previous tutorials show how to build IP with AXI stream interfaces and how they can be connected in a Vivado project to an AXI DMA. The DMA can be controlled from PYNQ to send data to the IP and receive results. AXI stream interfaces are useful if you are connecting multiple IP together in a dataflow type architecture. However, you don’t have to use AXI streams and DMAs with HLS IP. HLS supports AXI master interfaces which can read and write data as r…

You should also provide more details of the interfaces to your logic. This way the answer can be more specific.

Mario