Unabe to connect RFSOC Academia board to internet

[marioruiz]

This seems to be a problem with the DNS servers on the board.

These few post can help you

Connecting to the internet - Zynq 104

Thanks for the information. It is already worked, and I am able to connect to the internet and update my board. So, I am just setting fix IP address both on my board and PC (using same sub network of my switch). Then, I need to run the following command, which I am not really sure why. echo "nameserver 8.8.8.8" | sudo tee /etc/resolv.conf > /dev/null Each time, I logout out from board, I need to run that command to connect to to internet. But, at least my problem solved. Many thanks

ZCU104 Internet Issue Continuation and Solution

I’m a new user so have limitation for posts. Hence a new post. Continuing the discussion from Connecting to the internet - Zynq 104: I have found the solution for this. The pynq image is based of the Ubuntu Distro. Ubuntu is slowly migrating to a new tool called Netplan for network configurations. Pynq images for Pynq Z2 and ZCU104 are capable of using it. That MIGHT be the case for the other images. I shall put the steps I did below. Try the advice by other people above If the issue does …

Mario