Is it possible to save file to the SD card for booting? I found that there are seldom example for that, I need this function for my project. Thank you!

Hi, Can you elaborate? You can write to /boot/ this is the partition that is used for boot. Mario

In that case, You can use the boot.py file [image] Auto - run notebook at board startup Support Have a look at your SD card on your host computer. (i.e. Plug it in to your SD card reader) The boot.py script allows you to run things at boot. Cathal Mario

To be more clear, I am doing a project on sensor, I need to save the I/O value as CSV or excel. T hank you in advance.

What are you trying to do? If you just need to get your sensor data off the board, you have lots of ways to do this that would be easier (in my opinion!) than writing to the boot SD card. Remember that PYNQ is running on a Linux OS. You could connect another USB drive to one of the USB ports and s…

Basically a potentiostat, I am thinking USB is better too, but my boss ask for this, I never program the USB data transfer before though. Network is good, will try in the future. Thank you.

Hai guys, I too have the same issue , here i have used some analog input which was converted into digital samples by using xadc of pynqz1 and now i want to save these samples into a csv file and load it into sd card. then i would like to use this data from sd card for further activities. so can anyo…

you can save a numpy array directly using numpy function and it can be loaded quickly afterward. # To save data: numbers = numpy.asarray([ [1,2,3], [4,5,6], [7,8,9] ]) numpy.savetxt("filename.csv", numbers , delimiter=",") # To load data: load_numbers= numpy.loadtxt("filename.csv", delimiter=",")

OK But actually i am taking the data from xadc using vivado, it didnt work for me using python. because all the examples listed on github were using groove,but i want the sensor to be directly interfaced with Pynq Z1. can you please suggest me something now?

Enclosing the previous log from mine these modulator only answer question without show the entire picture mostly (nothing personal here). Maybe I elaborate a bit more: PYNQ overlay is a high-level idea under python control. If you design to have sensor or control below 100ms after powerup than my…

Save file from pynq Z1 to SD card

Support

mizan November 3, 2021, 1:33pm 3

I suppose you want to start your program at boot time. if that is the case, there is a detailed tutorial by peter you can find here.

Topic		Replies	Views
PYNQ OS not booting anymore. [end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)] Support	2	420	October 12, 2023
How to transfer file from PC to pynq-z2 Support	2	2252	October 17, 2019
Ultra96v-2 Boot Error Support	2	955	February 8, 2022
Alternative to SD Card Boot? Support	1	1072	June 16, 2020
Use pynq in xilinx zedboard Support	1	1859	June 5, 2019

Save file from pynq Z1 to SD card

Related topics