PYNQ 3.0.1 for Zybo Z7-20

Hello everyone,

As part of my Master’s, I had to use PYNQ on a Zybo Z7-20 board. I thought it could be useful to others if I shared how I did it. Everything is documented on my personal GitHub.

I also want to extend my gratitude to all the contributors to this particular forum post and all the linked posts in it : Pynq 2.7 for Zybo-Z7.

Best of luck !


Hi, your work is very good, I found when testing the image in this post [quote=“gabrielgagne, post:1, topic:6578”]
Pynq 2.7 for Zybo-Z7
[/quote] that it cannot use USB WiFi and lacks some serial port drivers (such as CH340), but there are no such problems on the PYNQ development board of 3.0.1 image, could you please share the ZYBO image file (.img), thank you very much!!


You can try this compressed image : Zybo-Z7-20-3.0.1

USB peripherals should work with it.