PYNQ 2.7
ZYNQ Ultrascale+ custom board.
Base overlay is nothing just ZYNQMP itself.
Current build is complete but bootup stuck @ boot
Warning: ethernet@ff0e0000 (eth0) using random MAC address - 76:19:01:31:a2:63
eth0: ethernet@ff0e0000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
1636 bytes read in 12 ms (132.8 KiB/s)
## Executing script at 20000000
18318408 bytes read in 1188 ms (14.7 MiB/s)
## Loading kernel from FIT Image at 10000000 ...
Using 'conf@1' configuration
Trying 'kernel@0' kernel subimage
Description: Linux Kernel
Type: Kernel Image
Compression: uncompressed
Data Start: 0x100000d4
Data Size: 18278912 Bytes = 17.4 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x00080000
Entry Point: 0x00080000
Hash algo: sha1
Hash value: 848b512fef70c58eda5d6c995e070ae8abbad6f1
Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 10000000 ...
Using 'conf@1' configuration
Trying 'fdt@0' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x1116ebcc
Data Size: 37669 Bytes = 36.8 KiB
Architecture: AArch64
Hash algo: sha1
Hash value: 478e14905b1d1d42f48ae444f893ebf3b2479f32
Verifying Hash Integrity ... sha1+ OK
Booting using the fdt blob at 0x1116ebcc
Loading Kernel Image
Loading Device Tree to 000000000fff3000, end 000000000ffff324 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.0-xilinx-v2020.2 (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP Wed Jun 29 17:19:14 UTC 2022
[ 0.000000] Machine model: xlnx,zynqmp
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000077c00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 22 pages/cpu s50392 r8192 d31528 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515844
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rw earlyprintk rootfstype=ext4 rootwait devtmpfs.mount=1 uio_pdrv_genirq.of_id="generic-uio" clk_ignore_unused
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1906296K/2096128K available (12476K kernel code, 762K rwdata, 3752K rodata, 768K init, 575K bss, 58760K reserved, 131072K cma-reserved)
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x2a8/0x42c with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 33.33MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x7b0074340, max_idle_ns: 440795202884 ns
[ 0.000003] sched_clock: 56 bits at 33MHz, resolution 30ns, wraps every 2199023255543ns
[ 0.000310] Console: colour dummy device 80x25
[ 0.000521] printk: console [tty0] enabled
[ 0.000543] Calibrating delay loop (skipped), value calculated using timer frequency.. 66.66 BogoMIPS (lpj=133332)
[ 0.000559] pid_max: default: 32768 minimum: 301
[ 0.000710] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000729] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001735] ASID allocator initialised with 32768 entries
[ 0.001802] rcu: Hierarchical SRCU implementation.
[ 0.002068] EFI services will not be available.
[ 0.002168] smp: Bringing up secondary CPUs ...
[ 0.002526] Detected VIPT I-cache on CPU1
[ 0.002559] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.002625] smp: Brought up 1 node, 2 CPUs
[ 0.002646] SMP: Total of 2 processors activated.
[ 0.002655] CPU features: detected: 32-bit EL0 Support
[ 0.002665] CPU features: detected: CRC32 instructions
[ 0.002699] CPU: All CPU(s) started at EL2
[ 0.002715] alternatives: patching kernel code
[ 0.003786] devtmpfs: initialized
[ 0.008110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008131] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.011222] xor: measuring software checksum speed
[ 0.048013] 8regs : 2111.000 MB/sec
[ 0.088044] 32regs : 2422.000 MB/sec
[ 0.128079] arm64_neon: 2103.000 MB/sec
[ 0.128088] xor: using function: 32regs (2422.000 MB/sec)
[ 0.128135] pinctrl core: initialized pinctrl subsystem
[ 0.128513] DMI not present or invalid.
[ 0.128771] NET: Registered protocol family 16
[ 0.130028] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.130056] audit: initializing netlink subsys (disabled)
[ 0.130467] cpuidle: using governor menu
[ 0.130671] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.130692] audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
[ 0.130820] Serial: AMBA PL011 UART driver
[ 0.143541] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.143556] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.143567] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.143578] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.339744] cryptd: max_cpu_qlen set to 1000
[ 1.365768] DRBG: Continuing without Jitter RNG
[ 1.441134] raid6: neonx8 gen() 1388 MB/s
[ 1.509191] raid6: neonx8 xor() 1302 MB/s
[ 1.577286] raid6: neonx4 gen() 1321 MB/s
[ 1.645322] raid6: neonx4 xor() 1271 MB/s
[ 1.713384] raid6: neonx2 gen() 1007 MB/s
[ 1.781431] raid6: neonx2 xor() 1057 MB/s
[ 1.849510] raid6: neonx1 gen() 657 MB/s
[ 1.917530] raid6: neonx1 xor() 796 MB/s
[ 1.985636] raid6: int64x8 gen() 1036 MB/s
[ 2.053670] raid6: int64x8 xor() 678 MB/s
[ 2.121729] raid6: int64x4 gen() 875 MB/s
[ 2.189753] raid6: int64x4 xor() 657 MB/s
[ 2.257850] raid6: int64x2 gen() 607 MB/s
[ 2.325911] raid6: int64x2 xor() 532 MB/s
[ 2.393979] raid6: int64x1 gen() 400 MB/s
[ 2.462034] raid6: int64x1 xor() 396 MB/s
[ 2.462043] raid6: using algorithm neonx8 gen() 1388 MB/s
[ 2.462051] raid6: .... xor() 1302 MB/s, rmw enabled
[ 2.462060] raid6: using neon recovery algorithm
[ 2.462405] iommu: Default domain type: Translated
[ 2.462695] SCSI subsystem initialized
[ 2.462853] usbcore: registered new interface driver usbfs
[ 2.462889] usbcore: registered new interface driver hub
[ 2.462920] usbcore: registered new device driver usb
[ 2.462958] mc: Linux media interface: v0.10
[ 2.462985] videodev: Linux video capture interface: v2.00
[ 2.463012] pps_core: LinuxPPS API ver. 1 registered
[ 2.463021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.463041] PTP clock support registered
[ 2.463066] EDAC MC: Ver: 3.0.0
[ 2.463486] zynqmp-ipi-mbox mailbox@ff990400: Registered ZynqMP IPI mbox with TX/RX channels.
[ 2.463676] FPGA manager framework
[ 2.463813] Advanced Linux Sound Architecture Driver Initialized.
[ 2.464118] Bluetooth: Core ver 2.22
[ 2.464144] NET: Registered protocol family 31
[ 2.464153] Bluetooth: HCI device and connection manager initialized
[ 2.464167] Bluetooth: HCI socket layer initialized
[ 2.464177] Bluetooth: L2CAP socket layer initialized
[ 2.464204] Bluetooth: SCO socket layer initialized
[ 2.464591] clocksource: Switched to clocksource arch_sys_counter
[ 2.464691] VFS: Disk quotas dquot_6.6.0
[ 2.464740] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.469306] NET: Registered protocol family 2
[ 2.469678] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 2.469719] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.469844] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 2.470064] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.470140] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.470191] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.470316] NET: Registered protocol family 1
[ 2.470584] RPC: Registered named UNIX socket transport module.
[ 2.470595] RPC: Registered udp transport module.
[ 2.470603] RPC: Registered tcp transport module.
[ 2.470610] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.470868] PCI: CLS 0 bytes, default 64
[ 2.503255] Initialise system trusted keyrings
[ 2.503361] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 2.503847] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.504202] NFS: Registering the id_resolver key type
[ 2.504221] Key type id_resolver registered
[ 2.504229] Key type id_legacy registered
[ 2.504242] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.504268] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.518540] NET: Registered protocol family 38
[ 2.518553] Key type asymmetric registered
[ 2.518561] Asymmetric key parser 'x509' registered
[ 2.518590] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 2.518657] io scheduler mq-deadline registered
[ 2.518668] io scheduler kyber registered
[ 2.520487] ps_pcie_dma init()
[ 2.547814] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.548952] Serial: AMBA driver
[ 2.551221] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.555905] brd: module loaded
[ 2.560155] loop: module loaded
[ 2.560969] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.562611] libphy: Fixed MDIO Bus: probed
[ 2.563822] tun: Universal TUN/TAP device driver, 1.6
[ 2.563916] CAN device driver interface
[ 2.565781] usbcore: registered new interface driver cdc_acm
[ 2.565792] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.565824] usbcore: registered new interface driver cdc_wdm
[ 2.565864] usbcore: registered new interface driver usb-storage
[ 2.565923] usbcore: registered new interface driver usbserial_generic
[ 2.565952] usbserial: USB Serial support registered for generic
[ 2.565981] usbcore: registered new interface driver usb_serial_simple
[ 2.566005] usbserial: USB Serial support registered for carelink
[ 2.566027] usbserial: USB Serial support registered for zio
[ 2.566049] usbserial: USB Serial support registered for funsoft
[ 2.566072] usbserial: USB Serial support registered for flashloader
[ 2.566097] usbserial: USB Serial support registered for google
[ 2.566120] usbserial: USB Serial support registered for libtransistor
[ 2.566145] usbserial: USB Serial support registered for vivopay
[ 2.566168] usbserial: USB Serial support registered for moto_modem
[ 2.566191] usbserial: USB Serial support registered for motorola_tetra
[ 2.566214] usbserial: USB Serial support registered for novatel_gps
[ 2.566238] usbserial: USB Serial support registered for hp4x
[ 2.566261] usbserial: USB Serial support registered for suunto
[ 2.566283] usbserial: USB Serial support registered for siemens_mpi
[ 2.566715] rtc_zynqmp ffa60000.rtc: registered as rtc0
[ 2.566766] i2c /dev entries driver
[ 2.568774] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 2.568844] Bluetooth: HCI UART driver ver 2.3
[ 2.568856] Bluetooth: HCI UART protocol H4 registered
[ 2.568864] Bluetooth: HCI UART protocol BCSP registered
[ 2.568888] Bluetooth: HCI UART protocol LL registered
[ 2.568897] Bluetooth: HCI UART protocol ATH3K registered
[ 2.568919] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.568964] Bluetooth: HCI UART protocol Intel registered
[ 2.568986] Bluetooth: HCI UART protocol QCA registered
[ 2.569022] usbcore: registered new interface driver bcm203x
[ 2.569056] usbcore: registered new interface driver bpa10x
[ 2.569089] usbcore: registered new interface driver bfusb
[ 2.569124] usbcore: registered new interface driver btusb
[ 2.569170] usbcore: registered new interface driver ath3k
[ 2.569298] EDAC MC: ECC not enabled
[ 2.569452] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[ 2.569924] sdhci: Secure Digital Host Controller Interface driver
[ 2.569934] sdhci: Copyright(c) Pierre Ossman
[ 2.569942] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.570236] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.570289] zynqmp_firmware_probe Platform Management API v1.1
[ 2.570301] zynqmp_firmware_probe Trustzone version v1.0
[ 2.596557] alg: No test for xilinx-zynqmp-aes (zynqmp-aes)
[ 2.596750] zynqmp_aes zynqmp_aes: AES Successfully Registered
[ 2.596750]
[ 2.596948] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384)
[ 2.597228] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
[ 2.597505] usbcore: registered new interface driver usbhid
[ 2.597515] usbhid: USB HID core driver
[ 2.597716] xlnk xlnk: Major 242
[ 2.597818] xlnk xlnk: xlnk driver loaded
[ 2.597829] xlnk xlnk: xlnk_pdev is not null
[ 2.599889] ARM CCI_400_r1 PMU driver probed
[ 2.600398] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
[ 2.600852] usbcore: registered new interface driver snd-usb-audio
[ 2.601684] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 2.602091] IPVS: Registered protocols (TCP, UDP)
[ 2.602114] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 2.602222] IPVS: ipvs loaded.
[ 2.602232] IPVS: [rr] scheduler registered.
[ 2.602370] Initializing XFRM netlink socket
[ 2.602463] NET: Registered protocol family 10
[ 2.602925] Segment Routing with IPv6
[ 2.603044] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.603395] NET: Registered protocol family 17
[ 2.603414] NET: Registered protocol family 15
[ 2.603439] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.603454] can: controller area network core (rev 20170425 abi 9)
[ 2.603487] NET: Registered protocol family 29
[ 2.603497] can: raw protocol (rev 20170425)
[ 2.603506] can: broadcast manager protocol (rev 20170425 t)
[ 2.603517] can: netlink gateway (rev 20190810) max_hops=1
[ 2.603596] Bluetooth: RFCOMM TTY layer initialized
[ 2.603609] Bluetooth: RFCOMM socket layer initialized
[ 2.603630] Bluetooth: RFCOMM ver 1.11
[ 2.603643] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.603652] Bluetooth: BNEP filters: protocol multicast
[ 2.603663] Bluetooth: BNEP socket layer initialized
[ 2.603672] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.603683] Bluetooth: HIDP socket layer initialized
[ 2.603800] 9pnet: Installing 9P2000 support
[ 2.603826] Key type dns_resolver registered
[ 2.604136] registered taskstats version 1
[ 2.604145] Loading compiled-in X.509 certificates
[ 2.605164] Btrfs loaded, crc32c=crc32c-generic
[ 2.613844] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 43, base_baud = 6249999) is a xuartps
[ 3.936998] printk: console [ttyPS0] enabled
[ 3.941618] of-fpga-region fpga-full: FPGA Region probed
[ 3.947919] nwl-pcie fd0e0000.pcie: Link is DOWN
[ 3.952586] nwl-pcie fd0e0000.pcie: host bridge /amba/pcie@fd0e0000 ranges:
[ 3.959566] nwl-pcie fd0e0000.pcie: MEM 0xe0000000..0xefffffff -> 0xe0000000
[ 3.966795] nwl-pcie fd0e0000.pcie: MEM 0x600000000..0x7ffffffff -> 0x600000000
[ 3.974400] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[ 3.980590] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.986074] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 3.992948] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
[ 4.000450] pci 0000:00:00.0: [10ee:d011] type 01 class 0x060400
[ 4.006518] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 4.015508] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[ 4.021211] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 4.027805] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 4.034934] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 4.042058] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 4.049185] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 4.056315] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 4.063439] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 4.070566] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 4.077703] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 4.084894] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 4.092022] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 4.099148] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 4.106274] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 4.113400] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 4.120529] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 4.127656] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 4.134781] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 4.142115] xilinx-psgtr fd400000.zynqmp_phy: Lane:3 type:8 protocol:4 pll_locked:yes
[ 4.153184] zynqmp_clk_divider_set_rate() set divider failed for pl0_ref_div1, ret = -13
[ 4.161831] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
[ 4.172550] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
[ 4.180648] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
[ 4.189090] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
[ 4.201645] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
[ 4.213997] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: no DMI vendor name!
[ 4.223452] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: Xilinx DisplayPort Sound Card probed
[ 4.233646] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000
[ 4.240629] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.247247] [drm] No driver support for vblank timestamp query.
[ 4.253253] xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display (ops 0xffff800010d7faa8)
[ 4.387010] random: fast init done
[ 11.124710] random: crng init done
[ 12.446998] [drm] Cannot find any crtc or sizes
[ 12.451780] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display on minor 0
[ 12.459890] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsystem driver probed
[ 12.468832] zynqmp-qspi ff0f0000.spi: rx bus width not found
[ 12.474499] zynqmp-qspi ff0f0000.spi: tx bus width not found
[ 12.480329] spi_master spi0: cannot find modalias for /amba/spi@ff0f0000/flash@0
[ 12.487734] spi_master spi0: Failed to create SPI device for /amba/spi@ff0f0000/flash@0
[ 12.496074] macb ff0e0000.ethernet: Not enabling partial store and forward
[ 12.503506] libphy: MACB_mii_bus: probed
[ 12.581282] Micrel KSZ9031 Gigabit PHY ff0e0000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:01, irq=POLL)
[ 12.597118] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 29 (76:19:01:31:a2:63)
[ 12.607266] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
[ 12.613827] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
[ 12.620352] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
[ 12.626877] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
[ 12.633390] dwc3-of-simple ff9d0000.usb0: dwc3_simple_set_phydata: Can't find usb3-phy
[ 12.641748] dwc3 fe200000.dwc3: Failed to get clk 'ref': -2
[ 12.648140] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 31
[ 12.652770] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 12.654450] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1066666 KHz
[ 12.659553] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 12.666985] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1199999 KHz
[ 12.674688] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000202010010
[ 12.692536] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0xfe200000
[ 12.698703] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 12.706971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.714197] usb usb1: Product: xHCI Host Controller
[ 12.719075] usb usb1: Manufacturer: Linux 5.4.0-xilinx-v2020.2 xhci-hcd
[ 12.724981] mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
[ 12.725687] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 12.738213] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01T00:00:17 UTC (17)
[ 12.746395] of_cfs_init
[ 12.746606] hub 1-0:1.0: USB hub found
[ 12.748867] of_cfs_init: OK
[ 12.752626] hub 1-0:1.0: 1 port detected
[ 12.755500] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.759509] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 12.772539] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 12.780212] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 12.786867] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.795104] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 12.803381] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.810617] usb usb2: Product: xHCI Host Controller
[ 12.815496] usb usb2: Manufacturer: Linux 5.4.0-xilinx-v2020.2 xhci-hcd
[ 12.822114] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 12.827307] hub 2-0:1.0: USB hub found
[ 12.831127] hub 2-0:1.0: 1 port detected
[ 12.920480] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.927012] clk: Not disabling unused clocks
[ 12.931482] ALSA device list:
[ 12.934447] #0: DisplayPort monitor
[ 12.938766] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 12.947387] cfg80211: failed to load regulatory.db
[ 12.952305] Waiting for root device /dev/mmcblk0p2...
[ 12.958838] mmc0: error -110 whilst initialising SD card
[ 13.092598] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 13.246954] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.04
[ 13.255141] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.262281] usb 1-1: Product: USB2.1 Hub
[ 13.266200] usb 1-1: Manufacturer: GenesysLogic
[ 13.330966] hub 1-1:1.0: USB hub found
[ 13.334953] hub 1-1:1.0: 4 ports detected
[ 13.394856] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 13.423189] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.04
[ 13.431372] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.438513] usb 2-1: Product: USB3.1 Hub
[ 13.442432] usb 2-1: Manufacturer: GenesysLogic
[ 13.474961] hub 2-1:1.0: USB hub found
[ 13.479000] hub 2-1:1.0: 4 ports detected